Changing The Selections After The Program Has Started; Auxiliary Functions - Beko WMB 81241 LM Manual

Auxiliary functions

Auxiliary function selection
If an auxiliary function that should not be selected
together with a previously selected function is
chosen, the first selected function will be cancelled
and the last auxiliary function selection will remain
active.
Ex.: If you want to select pre-wash first and then
quick wash, pre-wash will be cancelled and quick
wash will remain active.
Auxiliary function that is not compatible with the
program cannot be selected. (see, "Program
Selection Table")
• Prewash
When you select this function, the display will
indicate "F1" symbol.
• A pre-wash is only worthwhile for heavily
soiled laundry. Without pre-wash you save
energy, water, detergent and time.
• Pre-wash without detergent is recommended
for lace and curtains.
• Quick Wash
With this function, the wash time is shortened.
"F2" symbol lights up on the display.
• Use this function for smaller amounts or
slightly soiled laundries.
• Rinse Plus
When this function is selected, washing and rinsing
is performed with plenty of water. "F3" symbol
lights up on the display.
• Anti-Creasing
With this function, drum movement will be
lessened to prevent creasing and spinning speed
is limited. In addition, washing is carried out at a
higher water level. "F4" symbol lights up on the
display.
• Use this function for delicate laundries that
crease easily.
Whenever you select this auxiliary function,
C
load your machine with half of the maximum
laundry specified in the program table.
Time display
The display shows the time remaining for the
program to complete while a program is running.
Time is displayed in hours and minutes as "01:30".
Time delay
With the "Time delay" function you can delay the
program start up to 24 hours. Setting can be
made in intervals of 30 minutes.
Open the loading door, place the laundry inside
and fill detergent drawer. Set the washing
program, temperature, spin speed and, if required,
select the auxiliary functions. Press "Time delaying"
buttons "+" and "-" to set your desired time delay.
The Time delaying symbol will flash. Press "Start/
Pause/Cancel" button. Then the time delay starts
to count down. The Time delaying symbol will light
up. The Start symbol will light up.
The ":" in the middle of the displayed time delay
will start to flash.
•
More laundry may be loaded or taken out
during the time delay period. At the end of the
time delay countdown process, time delaying
symbol fades and the washing starts as the
program duration is displayed.
Changing the delay time
If you want to change the time during the
countdown:
Press "Start/Pause/Cancel" button. " : " in the
middle of the screen will stop flashing. The
Standby symbol will light up. The Time delaying
symbol will flash. The Start Symbol will fade. Press
"Time delaying" buttons "+" or "-" to set your
desired time delay. Press "Start/Pause/Cancel"
button. The Time delaying symbol will light up. The
Standby symbol will fade. The Start symbol will
light up.The ":" in the middle of the displayed time
delay will start to flash.
Canceling the time delay
If you want to cancel the time delay countdown
and start the program immediately:
Press "Start/Pause/Cancel" button. The ":" in
the middle of the displayed time delay will stop
flashing. Start symbol will fade. The standby
symbol and the time delaying symbol will flash.
Press time delaying button "-" to decrease the
desired time delay. Program duration after 30
minutes shall be displayed. Press Start/Pause/
Cancel Button to start the program.
Starting the Program
Press Start/Pause/Cancel button to start the
program. The start symbol which indicates that
the program has started will light up. The door
locks and the door locked symbol will light up. The
Symbol of the relevant step (prewash, main wash,
rinse, softener and spin) that the program has
started from will light up.
Changing the selections after the program
has started
The selected spin speed and program temperature
fade out. An empty frame appears.
When the "Program selection" button is brought
to the appropriate position, rpm and temperature
data reappear.
Switching the machine to standby mode
The machine is switched to standby mode by
pressing "Start/Pause/Cancel" button momentarily.
The Standby symbol which indicates the machine
is in standby mode lights up and the start symbol
that shows the program has started and is still
continuing fades out.
Selecting or canceling an auxiliary function in
pause mode
Auxiliary functions can be cancelled or selected in
accordance with the step the program is at.
Adding/removing laundry in pause mode
The door can be opened if the water level is
suitable. The door locked symbol will light up until
9 - EN