D-Link DAP-1160 User Manual page 26

Section  - Configuration
Enable DHCP
Disabled is the default setting.
Server:
If you want to use the DAP-1160 as a DHCP server, to automatically assign dynamic IP addresses on the network, you
will select Enabled.
DHCP IP Address If you have enabled the DHCP server function, enter the starting and Ending point of the IP address range for your
Range: network.
DHCP Lease Time: Choose the length of time during which the DHCP function of the DAP-1160 automatically regenerates the IP addresses
to the devices in your network.
Dynamic DHCP
Lists the devices on your network that are receiving dynamic IP addresses from the DAP-1160.
Client List:
D-Link DAP-1160 User Manual 6