Lan Settings - D-Link DAP-1160 User Manual

Section  - Configuration
The DAP-1160 is set to Static by default. Select
LAN Connection
this option if you do not have a DHCP server on
Type:
your network, or if you wish to assign a static IP
address to the DAP-1160.
Static IP: Select this option if you are manually assigning
an IP Address.
Select this option if you would like to have an
Dynamic IP:
IP Address automatically assigned to the DAP-
1160 by a DHCP server in your network.
IP Address:
192.168.0.50 is the default IP Address of the
Access Point.
255.255.255.0 is the default Subnet Mask.
Subnet Mask:
All devices on the network must have the
same subnet mask to communicate on the
network.
Gateway address:
Enter the IP Address of the router in your
network.
D-Link DAP-1160 User Manual

LAN Settings