D-Link DAP-1160 User Manual page 21

Section  - Configuration
In Bridge mode, The DAP-1160 wirelessly connects multiple networks, without functioning as a wireless AP.
Wireless Network
The Wireless Network Name is a unique
Name (also called
name that identifies a network. All devices
the SSID):
on a network must share the same wireless
network name in order to communicate on the
network. If you choose to change the wireless
network name from the default setting, input
your new wireless network name in this
field.
: This option is unavailable in Bridge mode.
Site Survey
Wireless Channel: All devices on the network must share the
same channel.
This option is unavailable in Bridge mode.
Enable Auto
Channel scan:
This option is unavailable in Bridge mode.
Enable Hidden
Wireless:
Enter the MAC addresses of the APs in your network that will serve as bridges to wirelessly connect multiple networks.
Remote AP MAC:
WDS Security:
None: Select None Encryption to across the network.
Select WEP 64bits/128bits to limit communication to only those devices that share the same WEP settings.
WEP64/128:
Select WPA-PSK, WPA2-PSK to secure your network using a password and dynamic key changes (No RADIUS server
WPA-PSK/WPA2-
required).
PSK:
Note: Bridge Mode is not completely specified in WiFi or IEEE standards. It can works with other DAP-1160..Communication with other access points is not
guaranteed.
D-Link DAP-1160 User Manual
Bridge Settings
1