Beko CVA34110 Instructions For Use Manual page 9

GB
Description of the Control Functions
a) Fridge Set and Vacation
The desired fridge temperature of the
appliance can be adjusted by using fridge set
button. To change the fridge set temperature
press the fridge set button. The first time the
button is pressed the current set temperature
is shown on the display then afterwards, each
time the button is pressed the new fridge set
temperature will be displayed in sequence: 4,
2, 8, 6, 4, ...
The fridge set temperature will blink on the
display for 5 seconds only. Then the actual
fridge temperature will be shown.
Vacation: The fridge compartment
temperature can be adjusted around 13° C.
When the fridge compartment is empty,
vacation function can be activated if desired.
The use of this function will save some power.
In order to preserve temperature inside the
fridge compartment, the fridge door should be
kept closed during vacation function.
Otherwise, the door open alarm will be active
within a minute and the interior light of the
fridge compartment will light on.
To activate vacation function, it is enough to
press the fridge set button for about 3 seconds.
Then the vacation icon on the display will light
on.
To deactivate vacation function, it is enough
to press Quick Fridge or Fridge Set buttons.
b) Freezer Set
The desired freezer temperature of the
appliance can be adjusted by using freezer set
button. To change the freezer set temperature
press the freezer set button. The first time the
button is pressed the current set temperature
is shown on the display then afterwards, each
time the button is pressed the new freezer set
temperature will be displayed in sequence: -18,
-20, -22, -24, -18,...
The freezer set temperature will blink on the
display for 5 seconds only. Then the actual
freezer temperature will be shown.
c) Quick Fridge
This button is designed for fast cooling of the
fridge. Press quick fridge button to start the
function. The quick fridge icon will light on
when the function is activated. Each time the
quick fridge function is activated, "1" blinks on
the display for 5 seconds only. Then the
actual fridge temperature will be shown. Quick
fridge function lasts for maximum 3 hours.
When the quick fridge function is completed,
quick fridge icon will light off automatically and
the previous fridge set temperature will be
recalled.
Quick fridge function terminates automatically
in 3 hours. To deactivate quick fridge function
manually, it is enough to press quick fridge
button once more or fridge set button.
Quickfreeze and quick fridge functions cannot
be active at the same time. Therefore,
pressing quick freeze button also deactivates
quick fridge function.
The electronic control system incorporates a
safety protection so that if the quick fridge
button is pressed more than once in a short
time, then the compressor will not run
immediately.
d) Quick Freeze
This button is designed for fast cooling of the
freezer. Press quick freeze button to start the
function. The quick freeze icon will light on
when the function is activated. Each time the
quick freeze function is activated, "-27" blinks
on the display for 5 seconds only. Then the
actual freezer temperature will be shown.
Quick freeze function lasts for maximum 32
hours. When the quick freeze function is
completed, quick freeze icon will light off
automatically and the previous fridge set
temperature will be recalled.
Quick freeze function terminates automatically
in 32 hours. To deactivate quick-freeze
function manually, it is enough to press quick
freeze button once more or freeze set button.
Quickfreeze and quick fridge functions cannot
be active at the same time. Therefore,
pressing quick fridge button also deactivates
quick freeze function.
4
Instruction for use