Beko CVA34110 Instructions For Use Manual page 17

Table of Contents

Advertisement

Available languages

Available languages

GB
7- There is actual freezer temperature
failure
The appliance performs cooling considering
the freezer set temperature. The actual
freezer temperature shown on the display will
reach the adjusted freezer set temperature,
when the packages are cold enough.
There may be some oscillations on the actual
fridge temperature shown on the display due;
a) The freezer door is Opened / Closed
frequently
b) Loading warm packages inside the freezer
c) Leaving the freezer door open for a long
period of time
8- Other possible malfunctions
Not every malfunction is a case for our
customer service. Very often, you can easily
resolve the problem without requesting
service.
Before requesting service, please check if the
malfunction has been caused by an operating
error. If this is the case, and a service has
been requested, a service charge will be
levied even if the device is still under
guarantee.
If the problem persists please contact your
dealer or customer service.
Please have the type and serial number of
your device when calling. The rating label is
located inside.
Door Open Alarm
There is a built in buzzer in the appliance that
will inform customer if the fridge door is left
open for a minute. This alarm is a periodic
alarm and it reminds the customer that the
fridge door is left open.
There is no buzzer alarm related to freezer
door.
In order to stop the door open alarm, it is
enough to press any button on the display or
close the door. Thus the alarm will stop till
next time.
Reversing the doors
The door of your refrigerator is designed to
operate towards both sides at your
convenience. If you want the door to open
towards the other side, please call the nearest
authorized maintenance service for
assistance.
12
Instruction for use

Advertisement

Table of Contents
loading

Table of Contents