Connections - Aiwa CX-NV8000 Operating Instructions Manual

CONNECTIONS
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is
120 V AC. Check that the rated voltage matches your local
voltage.
IMPORTANT
Connect the speakers, antennas, and all optional equipment
first. Then connect the AC cord in the end.
The front speaker marked R on the rear is the right speaker,
and the marked L is the left speaker,
7 Connect the right speaker to the main unit.
@
Connect the surround speaker cord to the SURROUND
SPEAKERS R terminal.
lllll!?
I
"": d
#@
Q
@ Connect the speaker cord to the SPEAKERS R terminals.
The speaker cord with the white stripe should be connected
to the 0 terminal and the black cord to the 0 terminal.
2 Connect the left speaker to the main unit.
Connect the surround speaker cord to the SURROUND
SPEAKERS L terminal, and speaker cord to the SPEAKERS
L terminals in the same manner as step 1.
3
FM antenna
Ill
Ill AM antenna
1
Ri
Spe
+4
/
AC cord
Surround speaker cord
3
ENGLISH