Enabling Upnp Tm For Windows ® Xp - D-Link DCS-6620G User Manual

DCS-6620G User's Manual Enabling UPnP for Windows XP
TM ®
Enabling UPnP for Windows XP
®
TM
UPnP is short for Universal Plug and Play, which is a networking architecture that provides
TM
compatibility among networking equipment, software, and peripherals. The DCS-6620G is a
UPnP enabled 802.11g PTZ Internet Camera. If your operating system is UPnP enabled,
the device will be easier to configure. If you do not want to use the UPnP functionality, it can
be disabled by unselecting "Enabled" on the DDNS/UPnP settings page under "Advanced" in
the configuration menu. Use the following steps to enable UPnP (Universal Plug and Play)
settings only if you are running Windows XP. If you are running Windows 2000, UPnP is not
available.
Go to Start > Settings.

Control Panel
Click
Add or Remove Programs
Click
D-Link Systems, Inc.
18