D-Link DCS-6620G User Manual page 68

DCS-6620G User's Manual
Next, click the Applications button under the Tools tab to set the application settings for the
DCS-6620G.
In this window, follow the steps below to set the application settings for snapshots to be
recorded to an FTP site:
 Select the weekdays you would like to record and enter the "Snapshots begin" time
and "Snapshots end" time for the weekly schedule, or select "All the time except
for the above schedule" if you want to enable full time snapshot recording.
 Check "Event operation."
 Set the delay "before detecting next event" to avoid continuous false alarms
following the original event.
 Set the delay to "take snapshots after event" to capture the direction of the moving
object.
 Check the window name (in this case Lab).
 Check "Upload snapshots while motion detected."
 Click "Send snapshots by FTP" and check "FTP put snapshots with date and time
suffix"
 Click the "Apply" button to save the settings.
Click the apply button when finished.You are now able to record snapshots to your FTP server
when motion detection is triggered.
D-Link Systems, Inc.
Record Snapshots to your FTP server with Motion Detection
Click Applications
68