LEXIBOOK Djiba NLJ100 Instruction Manual page 8

Lullaby Mode
1. Use the lullaby switch
• : "Lullaby mode OFF".
• : "Ethnic" lullaby.
• : "Classical" lullaby.
2. Use the timer switch
5, 10 or 15 minutes.
3. Press the start/stop button
4. Use the volume wheel
NOTE: During playback, you can switch between "classical" and "ethnic" lullabies without resetting the
timer.
Projector Mode
1. Use the light display switch
• : "Projector OFF".
• : "Projector with timer".
• : "Projector permanently ON"
2. When the light display switch is on the "Projector with timer" position
on the left-hand side of the unit to set a timed playback. Then press the start/stop button
light up the projector. Press the same button again to switch it off.
3. To use the projector without the music, turn the lullaby switch on top of the unit to "OFF" position
Using Lullaby and Projector together
To use the lullaby and projector together:
1. Set the timer switch to the desired timed playback.
2. Turn the lullaby switch to 1 or 2.
3. Set the lighting display switch to the "Projector with timer"
and light projector for the selected time period.
4. Or set the lighting display switch to the "Projector permanently ON"
lullaby for the selected time period and keep the light projector switched on permanently.
5. When you have finished your setting, press the start/stop butto
NLJ100IM0149.indb 8
located on top of the unit to select:
on the left-hand side of the unit to determine how long the lullaby plays:
to start playing the lullaby. Press the button once again to stop the music.
on top of the unit to adjust the volume of the music.
on the right-hand side of the unit to choose from three settings:
8
, use the timer switch
position to play the selected lullaby
position to play the selected
to start the music and the light show.
once to
.
16/06/2009 19:24