Power Led - D-Link DCS-1000 Manual

D-link systems manual web camera dcs-1000, dcs-1000w

Hide thumbs Also See for DCS-1000:

Table of Contents

LEDS

LED

stands for Light-Emitting Diode.

Power LED

The Power LED is positioned on the right side of the Internet Camera lens

while facing the Internet Camera. Steady blue confirms that the Internet Camera

is powered on.

Note:

There are three settings for the Power LED to control the light illumination for

monitoring purposes: Normal / Off / Dummy. Please refer to the Web

Configuration section for detailed information and usage.

LAN/WLAN LED (Wireless Internet Camera only)

The LAN/WLAN LED is positioned on the right side of the Internet Camera's,

lens while facing the Internet Camera. It is located to the right of the Power

LED

Steady orange confirms good connection to the LAN or WLAN.

Dependent on the data traffic the LED will begin to flash to indicate that the

Internet Camera is receiving/transceiving from/to the LAN or WLAN network.

Note:

There are three settings for the LAN/WLAN LED to control the light illumination

for monitoring purposes: Normal / Off / Dummy. Please refer to the Web

Configuration section for detailed information and usage.

Table of Contents

Dcs-1000w