Package Contents; Hardware Installation - D-Link DCS-3420 Quick Installation Manual

Quick Installation Guide

Package Contents

If any of the items are missing, please contact your reseller.
DCS-3420
Wireless Day &
Night Internet
Camera

Hardware Installation

Connect the Ethernet Cable
Connect an Ethernet cable to the network cable
connector located on the Internet Camera's back panel
and attach it to the network.
Note: It is required that an Ethernet cable is used
during initial setup. Once your wireless configuration is
set, you may disconnect the Ethernet cable and begin
communicating wirelessly with your DCS-3420.
Attach the Antennas
Locate the antennas included with your DCS-3420 and
attach them to the antenna connectors located on the
back of the DCS-3420.
DCS-3420
Wireless Day & Night Internet Camera
CD-ROM with
Manual and
Installation
Wizard
CAT5 Power
Ethernet Adapter
Cable
2
Camera Antenna
Stand