Power Supply - LEXIBOOK IT207 Instruction Manual

The magic Winnie the Pooh mat is a very special interactive play mat and
giant puzzle measuring 1 meter by 1 meter! It can be fixed on a wall to
decorate a bedroom or simply put on the floor for a colourful carpet
and play mat. The mat is made of EVA foam for a safe and comfortable
surface. This magic carpet also features 11 delightful sounds from Disney
Animals world which can be pressed to activate over 20 sound effects and
melodies.
Your magic Winnie the Pooh mat works with 2 alkaline 1.5V
batteries type AA.
This game must be powered using only the specified batteries.
1. Open the battery compartment cover located
on the game control pad by using a
screwdriver.
2. Install the 2 AA alkaline batteries observing
carefully the polarity indicated at the bottom
of the battery compartment, and as per the
diagram shown opposite.
3. Close back the battery compartment and
tighten the screw.
Do not use rechargeable batteries.
Non-rechargeable batteries are not to be
recharged. Rechargeable batteries are to be
removed from the toy before being charged.
Rechargeable batteries are only to be
charged under adult supervision. Different types of batteries or new and
used batteries are not to be mixed. Only batteries of the same or
equivalent type as recommended are to be used. Batteries are to be
inserted with the correct polarity. Exhausted batteries are to be removed
from the toy. The supply terminals are not to be short circuited. Do not
throw batteries into a fire. Remove the batteries if you are not going to use
the game for a long period of time.
WARNING: If the unit malfunctions or receives an electrostatic shock, turn
the unit off and on again. If this proves to be ineffective, remove the
batteries and insert them again.
IT207IM0207.indb 6
Introduction

Power Supply

1.5V "AA"
LR6 UM-3
1.5V "AA"
LR6 UM-3
6
22/6/07 09:58:43