Timer And Sleep Operation - Sharp XL-1200 Operation Manual

„ Sleep operation
1
Play back the desired sound source.
2
Press the SLEEP button.
To change the sleep time:
Press the SLEEP button repeatedly to select the desired sleep
time. The time will decrease as follows.
The amount of sleep time can also be changed while in the
sleep mode.
3:00 2:00 1:30
OFF 15
3
Your system will enter the power stand-by mode auto-
matically after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep op-
eration finishes.
To cancel the sleep operation:
Press the POWER button while the sleep timer is set.
To confirm the remaining sleep time:
Press the SLEEP button once while the sleep timer is set.
The remaining sleep time is displayed for about 3 seconds.
„ To use timer and sleep operation together
Example: To fall asleep and wake to the same radio station
You can play back the same source only (the function cannot be
switched).
1
Set the sleep time (see left, steps 1 - 2).
2
While the sleep timer is set, set the desired playback
time (steps 4 - 6, pages 25 - 26).
1.Sleep timer setting
2.Timer playback setting
15 minutes - 3 hours
1:00
30
01/2/19
End time
Desired time
Sleep operation will Timer playback
automatically stop. start time
XL-1200(U)3.fm
27