Table of Contents
Advertisement
Enhancing Your System
The connection cord is not included. Purchase a commercially avail-
able cord as shown below.
Red
White
Headphones
28
„ Listening to the playback sounds from
VCR, DVD, etc.
1
Use a connection cord to connect the VCR, DVD, etc. to the VID-
VCR, DVD, etc.
EO/AUX IN jacks.
When using video equipment, connect the audio output to this
unit and the video output to a television.
2
Press the POWER button to turn the power on.
3
Press the FUNCTION button until "AUX" appears on the display.
When operating with the remote control, press the VIDEO/AUX
To the line
output jacks
button.
4
Play the VCR, DVD, etc.
White
Note:
Red
To prevent hum interference, place this unit away from a television.
„ To record CD signals on MDs
The digital signal from this unit can be recorded by MiniDisc record-
ers, etc.
MD recorder
RCA cord
1
Remove the DIGITAL OUT jack cover.
(not supplied)
2
Use a connection cable for digital recording to connect the unit to
the OPTICAL IN jack of a MiniDisc recorder, etc.
3
Press the POWER button to turn the power on.
4
Put the MiniDisc recorder, etc. in the recording mode.
5
Play a CD on this unit.
To the optical line
input jack
Note:
Only CD signals can be output.
Connection cable
for digital recording
„ Headphones
z Before plugging in or unplugging the headphones, reduce the vol-
ume.
z Be sure your headphones have a 1/8" (3.5 mm) diameter plug
and are between 16 ohms and 50 ohms impedance. The recom-
mended impedance is 32 ohms.
z Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME buttons.
01/2/19
XL-1200(U)3.fm
Advertisement
Table of Contents
