Page 1
XL-1000V XL-1000V CP-XL1200U XL-1000V Video CD Compact Audio System consisting of XL- 1000V (main unit) and CP-XL1200U (speaker system). VIDEO CD COMPACT AUDIO SYSTEM MODEL XL-1000V OPERATION MANUAL NTSC/PAL ENGLISH Please refer to pages E-1 to E-38.
ENGLISH Introduction Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. Contents Page Page ! Important Instruction ! Advanced Video CD (Version 1.1) Playback Special Notes .
Special Notes XL-1000V CAUTION Laser Diode Properties Material: GaAIAs Wavelength: 780 nm Emission Duration: continuous Laser Output: max. 0.6 mW " This Video CD Compact Audio System is classified as a CLASS 1 LASER product. " The CLASS 1 LASER PRODUCT label is located on the rear cover.
Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible " Keep the unit away from direct sun-...
Accessories XL-1000V Please confirm that the following accessories are included. ! Care of compact discs Compact discs are fairly resistant to damage, however mistracking can occur due to an accumulation of dirt on the disc surface. Follow the guidelines below for maximum enjoyment from your CD collec- tion and player.
Remote Control XL-1000V ! Battery installation ! Test of the remote control Check the remote control after checking all connections have been Remove the battery cover. made correctly. (See pages 9 - 12.) Insert the batteries according to the direction indicated in Face the remote control directly to the remote sensor on the unit.
System Connections FM aerial AM loop aerial Right speaker MD recorder Left speaker not supplied Right speaker Left speaker Wall socket (See page 12.) Black wire with white dots Black wire ENGLISH...
Page 11
XL-1000V ! Aerial connection Notes: " When an external FM aerial is used, disconnect the supplied FM Supplied FM aerial: aerial wire from the FM 75 OHMS socket. Connect the FM aerial wire to the FM " When using an external AM aerial, be sure to keep the wire of the 75 OHMS socket and position the FM AM loop aerial connected.
Page 12
System Connections (continued) ! Placing the speaker system ! TV/monitor connection There is no distinction between the right and the left speakers. If the TV/monitor has a video input, connect it to VIDEO OUT socket on the rear of the unit. Left speaker Right speaker To video...
Page 13
XL-1000V ! Setting the AC voltage selector ! Connecting the AC power lead Check the setting of the AC voltage selector located on the rear After checking all the connections have been made correctly, panel before plugging the unit into a wall socket. If necessary, adjust connect the AC power lead to the AC power input socket, then into the wall socket.
Page 14
System Connections (continued) ! Setting the AM/FM interval To check the tuning span currently selected: Press the ON/STAND-BY button to turn the power on. The International Telecommunication Union (ITU) has established Press the FUNCTION button until "AM" appears on the display. that member countries should maintain either a 10 kHz or 9 kHz "...
General Control XL-1000V ! To turn the power on Press the ON/STAND-BY button to turn the power on. To set the unit to stand-by mode: Press the ON/STAND-BY button again. ! To change the display brightness (2 levels) You can switch the display brightness by pressing the DIMMER but- ton on the remote control.
Sound Control ! Adjusting the volume Press the VOLUME button to increase the volume and the VOL- button for decreasing..28 29 MAX ! Adjusting the bass Main unit operation: Press the BASS/TREBLE button until "BASS" appears on the display.
Setting the Clock XL-1000V Within 1 minute, press the PRESET ( ) button to adjust the hour and then press the MEMORY button. When the 12-hour display is selected, "AM" will change auto- matically to "PM". Within 1 minute, press the PRESET ( ) button to adjust the minutes and then press the MEMORY button.
Video CD Any CD that contains motion pictures can be played. ! Types of discs You can enjoy motion pictures with the sound quality of MDs and the This unit handles video CDs that support PBC (version 2.0). (PBC is picture quality of VHS tapes.
Preparation for Video CD Playback XL-1000V ! Adjusting the TV and VCR ! Selecting the video output format The TV and VCR input varies according to connection method. Be Video CD is recorded in PAL or NTSC format. sure to make the settings correctly. (Then, follow the playback pro- Select the video output format (PAL or NTSC) according to your TV cedure on pages 19 - 21 to check the settings.)
Playback of a Video CD with P. B. C. (Version 2.0) Playback control: Turn on the TV and set the input selector to "VCR". Video CDs that support "Playback control" can display still pictures. This function can be used with video CD software (video CDs with Press the ON/STAND-BY button to turn the power on.
Page 21
XL-1000V Notes: Select the desired menu number using the direct " After removing the video CD, make sure to press the (OPEN/ CLOSE) button and close the disc compartment. search buttons on the remote control. " When the unit enters the stand-by mode, the opened disc com- "...
Page 22
Playback of a Video CD with P. B. C. (Version 2.0) (continued) ! To move the menu screen (menu screen ! To play without activating the playback with more than 1 page) control function You can play a video CD with P.B.C. without activating the playback To move to the next menu screen: control function.
Playback of a Video CD without P. B. C. (Version 1.1) XL-1000V Press the FUNCTION button until "CD" or "NO DISC" appears on the display. When operating with the remote control, press the CD button. Press the (OPEN/CLOSE) button to open the disc compartment.
Page 24
Playback of a Video CD without P. B. C. (Version 1.1) (continued) ! To skip to the beginning of a track (skip ! Scan play search) Press the button on the remote control during playback. To move to the beginning of the next track: Each time the button or the button is pressed, one of four...
Direct Search System Repeat or Random Play XL-1000V By using the direct search buttons, the desired tracks can be played. You can select one of the playback mode; "Repeat play", "Random play" and "Normal play". Use the direct search buttons to se- lect a desired track.
Programmed Play You can choose up to 12 selections for playback in the order you Repeat step 2 for other tracks. Up to 12 tracks can be like. programmed. Press the button to start playback. Notes: " For discs with TOC, track numbers which do not exist on the discs are deleted from the programme at the time the disc information is read.
Digest Selection of Tracks XL-1000V Each track is divided into 9 sections. Press the direct search buttons to select the scene you You can look at the sections and select the scene you want to start want to watch. watching from. This function is convenient when you want to start from the middle of an undivided track, for example, a movie.
Time Search Selection Video Intro Play You can play back from the desired scene by specifying the time. Whilst in the playback mode, press the TIME SEARCH button to enter the time search mode. <TV screen> INPUT MAX 04:23 - -:- - Use the direct search buttons on the remote control to specify the time.
To Change the Audio Mode Changing the TV Screen Dis- XL-1000V play You can check the operation of the main unit by the on-screen dis- play. Sound of the playback source can be switched among the STEREO, MONO L, and MONO R modes.
Listening to a CD Press the ON/STAND-BY button to turn the power on. Press the FUNCTION button until "CD" or "NO DISC" appears on the display. When operating with the remote control, press the CD button. Press the (OPEN/CLOSE) button to open the disc compartment.
Page 31
XL-1000V ! To locate the beginning of a track After use: Press the ON/STAND-BY button to enter the power stand-by mode. To move to the beginning of the next track: The following playback functions are the same as video CD Press the button during playback.
Listening to the Radio Press the ON/STAND-BY button to turn the power on. Press the FUNCTION button until "FM" or "AM" ap- pears on the display. When operating with the remote control, press the TUNER but- ton, and then the BAND button to select "FM" or "AM". Press the TUNING ( ) button to tune in to the de- sired station.
Listening to the Memorised Station XL-1000V " Memorising a station " To recall a memorised station You can store 30 AM and FM stations in memory and recall them at Press the PRESET ( ) button for less than 0.5 seconds to the push of a button.
Timer and Sleep Operation This may be operated only with the remote control. Press the ON/STAND-BY button to turn the power on. Timer playback: The unit turns on and plays the desired source (video CD, CD, tuner) Press the CD or TUNER button to select the desired at the preset time.
Page 35
XL-1000V Notes: Within 1 minute, press the PRESET ( ) button to ! Once the time is set, the setting will be retained until a new time is entered. specify the minutes to start, then press the MEMORY ! When performing timer playback using another unit connected to button.
Page 36
Timer and Sleep Operation (continued) " Sleep operation " To use timer and sleep operation together Example: To fall asleep and wake to the same radio station Play back the desired sound source. You can play back the same source only (the function cannot be switched).
Enhancing Your System XL-1000V The connection lead is not included. Purchase a commercially avail- " Listening to the playback sounds from able lead as shown below. VCR, DVD, etc. Use a connection lead to connect the VCR, DVD, etc. to the VID- VCR, DVD, etc.
Troubleshooting Maintenance " If trouble occurs " Cleaning the CD pickup lens When this product is subjected to strong external interference Do not touch the laser pickup lens. If fingerprints or dust accumulate (mechanical shock, excessive static electricity, abnormal supply on the pickup, clean it gently with a dry cotton swab.
Specifications XL-1000V As part of our policy of continuous improvement, SHARP reserves " CD player the right to make design and specification changes for product improvement without prior notice. The performance specification fig- Type Compact disc player ures indicated are nominal values of production units. There may be...
Page 41
This file has been downloaded from: www.UsersManualGuide.com User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes.. Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide, manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product, documentation manual, user maintenance, brochure, user reference, pdf manual Downloaded from:...