Denon AVR-884 Operating Instructions Manual page 46

ENGLISH
6
Select the various parameters. (See "Surround parameters q" for a description of the various parameters.)
(Main unit)
7
Set the various surround parameters.
(Main unit)
8
When the surround parameters are set using the buttons on
the main unit, stop operating buttons after completing the
settings. The settings are automatically finalized and the
normal display reappears after several seconds.
DTS NEO:6 mode
1
1
Select the function to which the component you want to play
is connected.
Example: DVD
(Main unit)
2
Select the DTS NEO:6 mode.
(Main unit)
• The mode switches as shown below each time the button
is pressed.
DOLBY PL
46
(Remote control unit) (Remote control unit)
(Remote control unit)
2 4, 6 5, 7
(Remote control unit)
(Remote control unit)
II DTS NEO:6
9
Press the ENTER button to finish surround
parameter mode.
NOTE:
• When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.
2
1
9
5, 7
(Remote control unit)
The DTS NEO:6 Cinema or
Music mode can be chosen
directly by pressing the CINEMA
or MUSIC button on the remote
control unit during playback in
the DTS NEO:6 mode.
6
4, 6
5, 7
6