Denon AVR-4306 Operating Instructions Manual page 95

Advanced Setup – Part 2
3. Audio Input Setup
Audio Input Setup
This assigns the digital input terminals for the different input
1 Digital In Assign
sources.
2 EXT.IN Setup Set the Ext.In terminals playback method.
When connecting the iPod via a iPod Dock, it is possible to assign the
3 iPod Assign iPod Dock's audio and video signals to any input connectors on the AVR-
4306 and play them.
Input Function
4 The playback level is corrected individually for the different input sources.
Lev.
Function The names of the different input source can be changed as desired and
5
Rename displayed on the display.
Auto
FM stations are received automatically and stored in the
Preset
memory.
Memory
6 Tuner Presets
Preset
Preset channels that are not used often can be skipped.
Skip
Preset
The preset channels can be given the names you want.
Name
4. Video Setup
Video Setup
The HDMI input terminals are assigned for the different input sources.
1 HDMI In Assign
Select the HDMI audio signal playback method.
Component In This assigns the component video input terminals for the different input
2
Assign sources.
3 Video Convert This sets whether or not to use the video conversion function.
This sets whether or not to use the function for converting analog video
(composite video, S-Video or component video) signals into HDMI
signals.
4 HDMI Out Setup
When using this conversion function, set the aspect ratio, set the
resolution, set the color format and video range of the signals output from
the HDMI terminal.
5 Audio Delay Set the audio delay timing to synchronize the sound and video.
This sets whether or not to display the on screen display that appears on
On Screen
6 the monitor screen when the controls on the remote control unit or main
Display
unit are operated.
Default settings
Input
CD DVD VDP TV
source
Digital
COAX 1 COAX 2 OPT 1 OFF
Inputs
SW Level = +15dB
iPod Function = Aux
iPod Dock = NotUsed
CDR /
TUNER PHONO CD DVD VDP
TAPE
0 dB 0 dB 0 dB 0 dB 0 dB 0 dB
CDR /
TUNER PHONO CD DVD VDP
TAPE
A1 ~ A8 87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz
B1 ~ B8 520/600/1000/1400/1500/1710 kHz, 90.1/90.1 MHz
C1 ~ C8 90.1 MHz
D1 ~ D8 90.1 MHz
E1 ~ E8 90.1 MHz
F1 ~ F8 90.1 MHz
G1 ~ G8 90.1 MHz
All preset channels = ON
Default settings
DVD VDP TV
NONE NONE NONE
DVD VDP TV
1-RCA NONE 2-RCA
Resolution = 480p/576p
Color Space = Y Cb Cr
RGB Mode = Normal
Function/Mode = ON
Master Volume = ON
Mode = Mode 1
90
CDR /
DBS VCR-1 VCR-2 V.AUX
TAPE
OPT 2 OPT 3 OFF OPT 4 OPT 5
Surr.Sp = Surr.A
TV DBS VCR-1 VCR-2 V.AUX AUX1 AUX2
0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB
TV DBS VCR-1 VCR-2 V.AUX AUX1 AUX2
–
DBS VCR-1 VCR-2 V.AUX
NONE NONE NONE NONE
DBS VCR-1 VCR-2 V.AUX
3-RCA NONE NONE NONE
ON
Convert = ON
Aspect = Full
0 ms
Advanced Setup – Part 2
Page
67
67, 68
68
68
69
69, 70
Page
71
71, 72
72
72, 73
73
73