Sign in today to find solutions:

Forgot your password?

Don't have an account? Sign up

RCA ANT2000 - HDTV / TV User's Manual

Owner/user manual: ant2000.

 
ANT2000 Smart Indoor Antenna
Congratulations on your purchase of the ANT2000 Smart Indoor Antenna. With the
innovation of RCA's Smart Antennas, consumers no longer have to hassle with the manual
movement of "rabbit ears" to achieve the highest quality imagery and sound. Instead, the
technology built into our omni-directional Smart Antenna constantly monitors and gains
feedback from the television and antenna, self-adjusting for maximum entertainment results.
Please note that this antenna must be used with products that have a CEA909 Smart Antenna
connector interface.
ANT2000 Features
The ANT2000 Smart Indoor Antenna is packed with features that make it as functional as it
is attractive:
• Optimizes reception of local Standard Definition, High Definition, and FM signals
• Adjusts automatically for each channel
• Uses phase-array technology for directional adjustments—no motors necessary!
• Employs built-in low-noise amplifier and auto-gain controller for reducing interference and
adding just the right amount of signal enhancement
• Sits discreetly on any flat surface—no mounting required!
Important Antenna Notes
To function properly, the ANT2000 Smart Indoor Antenna system requires the provided
Smart Antenna Module. The Smart Antenna Module is the control center between your TV or
converter box and the Smart Antenna. When you switch channels, the Smart Module works
behind the scenes with the Smart Antenna to find the best signal instantly.
Make sure you follow the connection instructions in this manual to install your Smart
Antenna.
ANT2000 Hardware
The ANT2000 antenna package includes the following items:
1 ANT2000 Smart Antenna
1 Smart Module
1 Antenna Control Cable
1 Coaxial Cable
ANT2000 Smart Indoor Antenna
Antena Inteligente para Interiores
User's Guide
Guía del Usuario

Summary of Contents

  • Page 1

    Smart Antenna constantly monitors and gains feedback from the television and antenna, self-adjusting for maximum entertainment results. Please note that this antenna must be used with products that have a CEA909 Smart Antenna connector interface.

  • Page 2

    Note: For additional information about setting up your converter box, visit www.keepmytv.com 4. Connect the Smart Antenna’s built-in coaxial cable to the ANTENNA IN jack on the Smart Module. Note: The Smart Module should be used with this Smart Antenna only. Do not connect it to any other type of antenna.

  • Page 3

    • Do not bend coaxial cables into less than a three-inch radius. Tighter bends can cause shorts and can change a cable’s impedance. • Do not install a coaxial cable where it will have a pulling tension greater than 15 pounds during installation. After installation, make sure there is no tension on the cable.

  • Page 4

    12 months from the date of original purchase, such defect(s) will be repaired or replaced (at the Company’s option) without charge for parts and repair labor. To obtain repair or replacement within the terms of this Warranty, the product along with any accessories included in the original packaging is to be delivered with proof of warranty coverage (e.g.

  • Page 5

    RCA, los consumidores ya no tienen que mover manualmente las “orejas de conejo” para lograr una imagen y sonido de la más alta calidad. En vez, la tecnología incorporada en nuestra Antena Inteligente omnidireccional, monitoriza y recibe retroalimentación constantemente del televisor y de la antena, y se ajusta...

  • Page 6

    Antena Inteligente obtener instrucciones de conexión más detalladas. 3. Acople el cable de control para la antena suministrado al conector de la antena inteligente en la parte posterior del convertidor o televisor. Acople el otro extremo del cable de control para la antena suministrado al conector ANTENNA CONTROL en el Módulo Inteligente.

  • Page 7

    • No instale un cable coaxial donde su tensión de tiro sea mayor de 33 kg durante la instalación. Luego de finalizar la instalación, asegúrese que no haya tensión en el cable.

  • Page 8

    12 meses a partir de la fecha de compra original, tales defectos serán reparados o reemplazados (a opción de la Compañía) sin cargo alguno por las piezas y labores de reparación.

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: