Congratulations on your purchase of the ANT706 Amplified Indoor · Outdoor Antenna. This antenna makes bulky, unmanageable antennas a thing of the past. The ANT706 not only provides great reception, its new streamlined design is so attractive, you can use it just about anywhere inside and out.
Make sure the installation is secure with the use of guy wires or other mounting hardware. • If you lose your grip on the antenna, let it fall to the ground. Do not attempt to catch it as it may touch •...
U-bolt with the jagged edge faced inward and then loosely place the nuts on the bolts. Slide the U-bolts and mast clamps over the top of the mast and tighten the nuts to secure the antenna to the mast. Connect the cable to the F-connector. Raise the mast and secure it at the desired location.
Mount a grounding block (not supplied) as close as possible to the point where the downlead • enters the house. The downlead wire from the antenna to the grounding block and the mast ground wire should be • secured to the house with stand-off insulators, spaced four to six feet apart.
10330 North Meridian Street Indianapolis IN 46290 Trademark(s) ® Registered. Marque(s) déposée(s). Marca(s) Registrada(s). www.rca.com All other brands and product names are trademarks or registered trademarks of their respective owners. Product specifications subject to change. Product may vary from that shown.