Chapter 2: Product Overview; Front Panel Of The Powerline Network Adapter (Model Number: Plte200); Ports Panel Of The Powerline Network Adapter (Model Number: Plte200); Front Panel Of The Powerline 4-Port Network Adapter (Model Number: Plts200) - Linksys PLTE200 User Manual

Chapter 2
Chapter 2:
Product Overview
Thank you for choosing the Linksys by Cisco powerline
products: Powerline Network Adapter (model number:
PLTE200), Powerline 4-Port Network Adapter (model
number: PLTS200), or Powerline Network Kit (model
number: PLTK300).
The Powerline Network Adapter features one Ethernet
port to connect a router, computer, or other network
device to your powerline network, while the Powerline
4-Port Network Adapter features four Ethernet ports to
connect up to four computers or other network devices to
your powerline network.
The Kit features one Powerline Network Adapter and one
Powerline 4-Port Network Adapter to create a powerline
network. Connect the Powerline Network Adapter to your
network router, and connect the Powerline 4-Port Network
Adapter to computers or other network devices.
For more information about powerline networking, refer
to "Chapter 1: Introduction to Powerline Networking".
Front Panel of the Powerline Network
Adapter (model number: PLTE200)
Power (Blue) The power LED lights up when
the Powerline Adapter is powered on.
Ethernet
(Blue) The Ethernet LED lights up
when the Powerline Adapter is connected to a
network device through the Ethernet port. The
LED flashes to indicate network activity over
that port.
Powerline (Blue) The Powerline LED lights up
when the Powerline Adapter is connected to
the powerline network through the Power port.
The LED flashes to indicate network activity over
that port.
Powerline Network Adapter
Ports Panel of the Powerline Network
Adapter (model number: PLTE200)
Ethernet
The Ethernet port connects to an
Ethernet network device, such as a router or
computer.
Power The Power port connects to the
powerline end of the power cord.
Front Panel of the Powerline 4-Port
Network Adapter (model number:
PLTS200)
Power
(Blue) The power LED lights up when
the Powerline Adapter is powered on.
Ethernet (Blue) These
correspond with the numbered Ethernet ports
on the back panel. A LED lights up when its
corresponding port is connected to a network
device. It flashes to indicate network activity
over that port.
Powerline
(Blue) The Powerline LED lights up
when the Powerline Adapter is connected to
the powerline network through the Power port.
The LED flashes to indicate network activity over
that port.
Product Overview
numbered LEDs
3