Section 2
Connect to the Wireless Network
Note: If the Airlink101 Wireless Monitor does not open on your desktop, you
can open the Airlink101 Wireless Monitor utility by double clicking on the
Airlink101 Wireless Monitor Utility icon in the system tray at the bottom right-
hand corner of your screen.
If the icon does not appear in the system tray, go to Start → Programs →
Airlink101 → Airlink101 Wireless Monitor.
Step 2.1
Click on Network, you will see the available wireless networks in your
environment. Select the wireless network you want to connect to and click on
Connect.
Step 2.2
Type in the network key of your wireless network and click OK.
Step 2.3
After the adapter connects to the wireless network successfully, a blue
triangle will appear at the front of your wireless network.