Troubleshooting
Troubleshooting
Camera problems
Status
Camera does not
turn on
Camera does not turn
off
Camera buttons and
controls do not
function
Camera freezes up
when a card is inserted
or removed.
LCD is too dark.
In Review, a blue or
black screen is
displayed instead of
a picture
In Review, you do not
see a picture (or the
expected picture) on
the LCD
Pictures remaining
number does not
decrease after taking a
picture
Flash does not fire
52
Solution
■
Charge rechargeable batteries
■
Remove then reinsert or replace batteries. If the camera still does
not function, go to
Interactive Troubleshooting & Repairs.
■
Turn the camera off, then back on. Make sure the camera is
turned off before inserting or removing a card.
■
Adjust the LCD Brightness setting
■
Transfer the picture to the computer
the card or internal memory.
■
Take another picture.
■
Check the image storage location
in the camera
(see page
Caution: Formatting a card deletes all pictures and
videos, including protected files.
■
Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
■
Check the flash setting, and change as needed
NOTE: The flash does not fire in all modes.
(see page
www.kodak.com/go/z981support
(see page
(see page
(see page
46)
www.kodak.com/go/support
1).
and select
44).
47), then format
45). Format the card
(see page
14).