Table of Contents
Advertisement
Troubleshooting
Troubleshooting
Camera problems
Status
Camera does not
turn on
Camera does not turn
off
Camera buttons and
controls do not
function
LCD is too dark.
In Review, a blue or
black screen is
displayed instead of
a picture
Pictures remaining
number does not
decrease after taking a
picture
Flash does not fire
Memory card is almost
or entirely full
Battery life is short
42
Solution
■
Make sure the battery is charged and installed correctly
page
1).
■
Adjust the LCD Brightness setting
■
Transfer all pictures to the computer
■
Take another picture.
■
Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
■
Check the flash setting, and change as needed
NOTE: The flash does not fire in all modes.
■
Transfer the pictures to the computer
■
Delete pictures from the card
■
Make sure the correct battery type is installed
■
Wipe the contacts with a clean, dry cloth before inserting a
battery in the camera.
■
Insert a new/charged battery
(see page
35).
(see page
37).
(see page
(see page
37).
(see page
22) or insert a new card.
(see page
(see page
1).
www.kodak.com/go/support
(see
10).
51).
Advertisement
Table of Contents
Troubleshooting
