Kodak M550 - EXTENDED GUIDE Extended User Manual page 50

Troubleshooting
Picture quality problems
Status
Picture is not clear
Picture is too dark
Picture is too light
44
Solution
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
Clean the lens (see page
■
Make sure the camera is not in Macro mode if you are more than
27.6 in. (70 cm) from your subject
■
Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
■
Use a larger picture size
■
If you're manually adjusting the ISO speed, realize that a high ISO
setting may cause grainy pictures
■
Reposition the camera for more available light.
■
Use Fill flash (see page
behind the subject.
■
Move so that the distance between you and the subject is within the
effective flash range. (See Camera Specifications starting on
page 47.)
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
In Program mode, adjust the Exposure Compensation
■
Reposition the camera to reduce the amount of available light.
■
Turn the flash off
■
Move so that the distance between you and the subject is within the
effective flash range. (See Camera Specifications starting on
page 47.)
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
In Program mode, adjust the Exposure Compensation
49).
(see page
(see page 31).
(see page
10) or change your position so light is not
(see page 10).
www.kodak.com/go/support
33).
32).
(see page
(see page
32).
32).