Printing - Kodak EASYSHARE ONE User Manual

Printing

Problem
Printing does not start
Camera prints to the
wrong printer
Print is not complete
www.kodak.com/go/support
Cause and/or solution
■
The printer power is off.
■
Printer is busy printing or is engaged in another session.
■
Printer has a full buffer.
■
Printer is in an error state. Correct the error.
■
The printer, camera, or computer (if using one) are not connected
to the network or are on different networks.
■
The IP address setting on the camera or printer is incorrect.
Change the IP address or set to Dynamic IP.
■
There is a problem with the network (see
■
The selected printer has the same name as the intended one, and
is on the same network.
■
The printer was disconnected from the network in mid-print.
Troubleshooting
page 77).
80