Pre-Assigning Pictures To An Album; Changing Capture Settings - Kodak EASYSHARE ONE User Manual

Taking pictures and videos: more tips and tricks

Pre-assigning pictures to an album

You can create or assign an album in which to place your pictures and videos as you
take them.
1 In Capture
2 Touch New Album to start a new album, or touch an existing album to select it.
3 When finished, touch Done.
A check mark appears in the Capture album icon.
The setting remains until you change it.
■ To stop pre-assigning pictures to the album, touch the Capture album icon again.
The check mark in the Capture album icon disappears.

Changing capture settings

1 Press the Menu button, then select Setup.
2 Touch Capture
3 Select a setting and option to change.
NOTE: Some capture settings are unavailable in some scene modes and videos.
Setting
Picture Size
Choose a picture
resolution.
This setting remains until
you change it.
33
, touch the Capture album icon,
.
Options
4.0 MP (default)—for printing up to 20 x 30 in. (51 x 76 cm);
pictures are highest resolution and largest file size.
3.5 MP (3:2)—ideal for printing 4 x 6 in. (10 x 15 cm) prints without
cropping. Also for printing up to 11 x 14 in. (28 x 36 cm); some
cropping may result due to the 3:2 aspect ratio.
2.1 MP—for printing up to 8 x 10 in. (20 x 25 cm); pictures are
medium resolution with smaller file size.
1.1 MP—for printing up to 5 x 7 in. (13 x 18 cm); for emailing,
Internet, or screen display; pictures are lowest resolution and
smallest file size.
.
www.kodak.com/go/support