Using The Flash - Kodak EasyShare DX6340 User Manual

Using the Flash

Use the flash when you take pictures at night, indoors, or outdoors in heavy
shadows. The flash setting can be changed in any Still mode. The default flash
setting is restored when you exit the mode or turn off the camera, except in PAS
mode (see page 23).
Turning On the Flash
Flash
Flash
setting button
delete
share
EasyShare
22
Chapter 2
Wide Angle 1.6-19.4 ft (0.5-5.9 m)
Telephoto
Press the
through the flash options.
The active flash icon is displayed in the
camera screen status area
DX6340
2.5-8.9 ft (0.75-2.7 m)
button repeatedly to scroll
Auto Flash—flash fires when
the lighting conditions require
it.
Off—flash never fires.
Fill—flash fires every time you
take a picture, regardless of the
lighting conditions.
Red-eye—flash fires once so
the subject's eyes become
accustomed to the flash, then
fires again when the picture is
taken. (If the lighting
conditions require flash but do
not require Red-eye reduction,
the flash may fire only once.)
(page 8).