Kodak EasyShare DX6340 User Manual page 98

Problem
Picture is too
light.
In Review mode,
a blue screen is
displayed instead
of a picture.
Stored pictures
are damaged.
86
Chapter 10
Cause
The flash is not needed. Change to Auto flash or Flash Off
The subject was too
close for flash.
The light sensor is
covered.
Too much light.
Auto exposure was not
achieved.
The picture has no
thumbnail or an
unrecognized
thumbnail.
The card was removed
when the ready light
was blinking.
Solution
(page 22).
Move so there is at least 1.6 ft (0.5
m) in Wide; 2.5 ft (0.75 m) in Tele
between camera and subject.
Hold the camera so your hands or
other objects do not cover the light
sensor.
Decrease Exposure Compensation
(page 28).
To take the best possible pictures,
press the Shutter button
half-way and hold. When the
ready light glows green, press the
Shutter button the rest of the
way down to take the picture.
Transfer the picture to the
computer (page 71), or delete the
picture (page 49).
Make sure the ready light is not
blinking before removing the card.