Table of Contents
Advertisement
Cleaning the Pick Roller
38
Occasionally, dust and paper particles collect on the printer's pick roller which
pulls paper from the paper tray. These accumulations can prevent the pick roller
from pulling the paper. A "Printer is out of paper" message, when there is still
paper in the tray, may indicate that the pick roller needs cleaning.
To clean the pick roller:
1. Turn the printer power off and unplug the power cord.
2. Remove the output tray and the paper tray.
3. Turn the printer on its left side.
4. Locate the pick roller.
Pick Roller
5. Wrap a pressure-sensitive tape, such as masking or cellophane tape, sticky side
out, around three fingers.
6. Place the three taped fingers on the pick roller. Use these fingers to turn the
roller several times, making sure that the tape touches all of the roller surface.
7. Turn the printer right side up.
8. Plug in the power cord and turn the printer power on. Make sure paper is
loaded correctly in the paper tray. Print a copy. If the pick roller still does not
pick the paper, contact your Kodak representative for service.
Photo Printer 4700 Series
Advertisement
Table of Contents
