Hot Plug And Hot Swap Functions For Sata; Sataii Hdds; Hot Plug And Hot Swap Functions For Sata3 Hdds - ASROCK P55 DELUXE3 - V1.0 User Manual

Table of Contents

Advertisement

2.17 Hot Plug and Hot Swap F
2.17 Hot Plug and Hot Swap Functions for SA
2.17 Hot Plug and Hot Swap F
2.17 Hot Plug and Hot Swap F
2.17 Hot Plug and Hot Swap F
HDDs
HDDs
HDDs
HDDs
HDDs
This motherboard supports Hot Plug and Hot Swap functions for SATA / SATAII in
RAID / AHCI mode. Intel
P55 chipset provides hardware support for Advanced
®
Host controller Interface (AHCI), a new programming interface for SATA host
controllers developed thru a joint industry effort.
NOTE
What is Hot Plug Function?
If the SATA / SATAII HDDs are NOT set for RAID configuration, it is called
"Hot Plug" for the action to insert and remove the SATA / SATAII HDDs
while the system is still power-on and in working condition.
However, please note that it cannot perform Hot Plug if the OS has been
installed into the SATA / SATAII HDD.
What is Hot Swap Function?
If SATA / SATAII HDDs are built as RAID1 or RAID 5 then it is called "Hot
Swap" for the action to insert and remove the SATA / SATAII HDDs while
the system is still power-on and in working condition.
2.18 Hot Plug and Hot Swap F
2.18 Hot Plug and Hot Swap F
2.18 Hot Plug and Hot Swap F
2.18 Hot Plug and Hot Swap F
2.18 Hot Plug and Hot Swap Functions for SA
This motherboard supports Hot Plug and Hot Swap functions for SATA3 in RAID /
AHCI mode. Marvell SE9128 chipset provides hardware support for Advanced
Host controller Interface (AHCI), a new programming interface for SATA host
controllers developed thru a joint industry effort.
NOTE
What is Hot Plug Function?
If the SATA3 HDDs are NOT set for RAID configuration, it is called "Hot
Plug" for the action to insert and remove the SATA3 HDDs while the
system is still power-on and in working condition.
However, please note that it cannot perform Hot Plug if the OS has been
installed into the SATA3 HDD.
What is Hot Swap Function?
If SATA3 HDDs are built as RAID1 then it is called "Hot Swap" for the
action to insert and remove the SATA3 HDDs while the system is still
power-on and in working condition.
unctions for SA
unctions for SAT T T T T A / SA
unctions for SA
A / SA
A / SA
A / SAT T T T T AII
unctions for SA
A / SA
unctions for SAT T T T T A3 HDDs
unctions for SA
unctions for SA
unctions for SA
A3 HDDs
A3 HDDs
A3 HDDs
A3 HDDs
4 3
4 3
4 3
4 3
4 3
AII
AII
AII
AII

Advertisement

Table of Contents
loading

This manual is also suitable for:

P55 deluxe3

Table of Contents