Oc Tweaker Screen - ASROCK P55 DELUXE3 - V1.0 User Manual

3.3 3.3 OC T 3.3 OC T OC T OC Tweak weak weaker Screen weak er Screen er Screen er Screen
3.3 3.3 OC T weak er Screen
In the OC Tweaker screen, you can set up overclocking features.
Main OC Tweaker Advanced
OC Tweaker Settings
Load CPU EZ OC Setting
Load Memory EZ OC Setting
Intelligent Energy Saver
Good Night LED
Overclock Mode
BCLK Frequency (MHz)
PCIE Frequency (MHz)
Boot Failure Guard
Spread Spectrum
CPU Ratio Setting
QPI Frequency
DRAM Frequency DDR3_1333
DRAM Timing Control
ASRock VDroop Control
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Load CPU EZ OC Setting
You can use this option to load CPU EZ overclocking setting. Please note
that overclocing may cause damage to your CPU and motherboard. It
should be done at your own risk and expense.
Load Memory EZ OC Setting
You can use this option to load memory EZ overclocking setting. Please
note that overclocing may cause damage to your memory and motherboard.
It should be done at your own risk and expense.
Intelligent Energy Saver
Intelligent Energy Saver is a revolutionary technology that delivers
unparalleled power savings. The default value is [Disabled]. Configuration
options: [Enabled] and [Disabled]. If you want to enable this function,
please set this item to [Enabled]. Besides the BIOS option, you can also
choose our Intelligent Energy Saver utility to enable this function.
Good Night LED
Enable this option to turn off Power LED and Lan LED when the system is
power on. The keyboard LED will also be turned off in S1, S3 and S4 state.
The default value is [Disabled].
Overclock Mode
Use this to select Overclock Mode. Configuration options: [Auto], [Manual],
[I.O.T.] and [Optimized]. The default value is [Auto]. If you select [Manual],
Untied Overclocking function is enabled. Please refer to page 52 for the
details of Untied Overclocking Technology. Therefore, you are allowed to
adjust the Host frequency and PCIE frequency in the following two items.
If you select [I.O.T.] (Intelligent Overclocking Technology), the system will
automatically enable the overclocking function when your CPU is heavy
loaded.
BIOS SETUP UTILITY
H/W Monitor Boot Security
Overclocking may cause
[Press Enter]
damage to your CPU and
[Press Enter]
motherboard.
[Disabled]
It should be done at
[Disabled]
your own risk and
expense.
[Auto]
[133]
[100]
[Enabled]
[Auto]
22 [22]
4.800GT [Auto]
Enter Go to Sub Screen
[Auto] F1
F9
F10
ESC
[With VDrop]
5 5 5 5 5 5
5 5 5 5
Exit
Select Screen
Select Item
General Help
Load Defaults
Save and Exit
Exit