Storage Configuration - ASROCK P55 DELUXE3 - V1.0 User Manual

3.4.4 Storage Configuration

3.4.4 3.4.4 Storage Configuration Storage Configuration Storage Configuration
3.4.4 3.4.4 Storage Configuration
BIOS SETUP UTILITY
Advanced
Storage Configuration
SATA Operation Mode
SATAII 1,2,3,4 Configuration
SATAII 5,6 Configuration
Marvell SATA3 Operation Mode
eSATA Compatible Mode
SATAII_1
SATAII_2
SATAII_3
SATAII_4
SATAII_5
SATAII_6
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
SATAII Operation Mode
Use this to select SATAII Operation Mode. Configuration options: [IDE],
[RAID], [AHCI] and [Disabled]. The default value is [IDE].
If you select [IDE] mode, the options "SATAII 1,2,3,4 Configuration" and
"SATAII 5,6 Configuration" will appear.
If you select [RAID] or [AHCI] mode, the options "Hot Plug" and "Link Power
Management" will appear.
AHCI (Advanced Host Controller Interface) supports NCQ and other
new features that will improve SATA disk performance but IDE
mode does not have these advantages.
Marvell SATA3 Operation Mode
Use this to select Marvell SATA3 Operation Mode. Configuration options:
[IDE] and [AHCI]. The default value is [IDE].
eSATA Compatible Mode
Use this to select eSATA Compatible Mode. Configuration options: [Enabled]
and [Auto]. The default value is [Auto].
Options
[IDE]
IDE
[Compatible]
RAID
[Enhanced]
AHCI
[IDE]
Disabled
[Auto]
[Hard Disk]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
Select Screen Select Screen
[Not Detected]
Select Item Select Item
+- +- Change Option Change Option
F1 General Help
F1 General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
6 4 6 4 6 4
6 4 6 4