Serial Ata (Sata) / Serial Ataii (Sataii) Hard Disks; Installation - ASROCK P45XE User Manual

2 . 1 4 2 . 1 4 Serial A 2 . 1 4 Serial A Serial A Serial AT T T T T A (SA A (SA A (SA A (SAT T T T T A) / Serial A
2 . 1 4 2 . 1 4 Serial A A (SA

Installation

Installation Installation Installation Installation
P45XE-WiFiN / P45XE-R adopts Intel
Serial ATA (SATA) / Serial ATAII (SATAII) hard disks and RAID (RAID 0, RAID 1, RAID
10, RAID 5, and Intel Matrix Storage) functions. P45XE adopts Intel
bridge chipset that supports Serial ATA (SATA) / Serial ATAII (SATAII) hard disks. You
may install SATA / SATAII hard disks on this motherboard for internal storage devices.
This section will guide you to install the SATA / SATAII hard disks.
STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard's SATAII
connector.
STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard
disk.
1. If you plan to use RAID 0, RAID 1, RAID 10 or Intel Matrix Storage
function, you need to install at least 2 SATA / SATAII hard disks. If you
plan to use RAID 5 function, you need to install at least 3 SATA / SATAII
hard disks.
2. It is not recommended to switch the "Configure SATAII as" setting after
OS installation.
A) / Serial AT T T T T AII (SA A) / Serial A A) / Serial A AII (SAT T T T T AII) Hard Disks AII (SA AII (SA
A) / Serial A AII (SA
ICH10R south bridge chipset that supports
®
4 0 4 0 4 0
4 0 4 0
AII) Hard Disks AII) Hard Disks AII) Hard Disks
AII) Hard Disks
ICH10 south
®