ASROCK P45X3 DELUXE - V1.0 User Manual page 48

Table of Contents

Advertisement

Overclock Mode
Use this to select Overclock Mode. Configuration options: [Auto], [Manual]
and [I.O.T.]. The default value is [Auto]. If you select [Manual], Untied
Overclocking function is enabled. Please refer to page 43 for the details of
Untied Overclocking Technology. If you select [I.O.T.] (Intelligent Overclocking
Technology), you are allowed to adjust the CPU frequency and PCIE frequency
in the following two items. Therefore, the system will automatically enable the
overclocking function when your CPU is heavy loaded.
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency.
Strap FSB to MCH
Use this item to strap FSB to MCH. Configuration options: [Auto], [800],
[1066], [1333] and [1600]. The configuration options depend on the CPU
you adopt. The default value is [Auto].
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Spread Spectrum
This item should always be [Auto] for better system stability.
Ratio Status
This is a read-only item, which displays whether the ratio status of this
motherboard is "Locked" or "Unlocked". If it shows "Unlocked", you will find
an item Ratio CMOS Setting appears to allow you changing the ratio
value of this motherboard.
Ratio Actual Value
This is a read-only item, which displays the ratio actual value of this
motherboard.
Ratio CMOS Setting
If the ratio status is unlocked, you will find this item appear to allow you
changing the ratio value of this motherboard. If the CPU you adopt supports
EIST (Intel (R) SpeedStep(tm) tech.), and you plan to adjust the ratio value,
please disable the option " Intel (R) SpeedStep(tm) tech." in advance.
Enhance Halt State
All processors support the Halt State (C1). The C1 state is supported
through the native processor instructions HLT and MWAIT and requires no
hardware support from the chipset. In the C1 power state, the processor
maintains the context of the system caches.
CPU Thermal Throttling
You may select [Enabled] to enable P4 CPU internal thermal control
mechanism to keep the CPU from overheated.
4 8
4 8
4 8
4 8
4 8

Advertisement

Table of Contents
loading

This manual is also suitable for:

P45x3 deluxe

Table of Contents