Ide Configuration - ASROCK P45TS-R User Manual

Restore on AC/Power Loss
This allows you to set the power state after an unexpected AC/power
loss. If [Power Off] is selected, the AC/power remains off when the
power recovers. If [Power On] is selected, the AC/power resumes
and the system starts to boot up when the power recovers.
Ring-In Power On
Use this item to enable or disable Ring-In signals to turn on the system from
the power-soft-off mode.
PCI Devices Power On
Use this item to enable or disable PCI devices to turn on the system from the
power-soft-off mode.
PS/2 Keyboard Power On
Use this item to enable or disable PS/2 keyboard to turn on the system from
the power-soft-off mode.
RTC Alarm Power On
Use this item to enable or disable RTC (Real Time Clock) to power on the
system.
ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is
[Disabled]. Please set this option to [Enabled] if you plan to use this
motherboard to submit Windows
3.4.5

3.4.5 IDE Configuration

3.4.5 3.4.5 3.4.5 IDE Configuration IDE Configuration IDE Configuration IDE Configuration
BIOS SETUP UTILITY
Advanced
IDE Configuration
SATAII Configuration [Enhanced]
[IDE]
Configure SATAII as
OnBoard IDE Controller
[Enabled]
SATAII 1
SATAII 2
SATAII 3
SATAII 4
SATAII 5
SATAII 6
IDE1 Master
IDE1 Slave
AHCI CD/DVD Boot Time out
[35]
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Vista certification.
® TM
Options
Disabled
Compatible
Enhanced
[Hard Disk]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected] Select Screen Select Screen
Select Item Select Item
[Not Detected]
+- +- Change Option Change Option
[Not Detected]
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
5 8 5 8 5 8
5 8 5 8