Chipset Configuration - ASROCK P45TS-R User Manual

Intel (R) C-STATE tech.
Intel (R) C-STATE tech. is achieved by making the power and thermal control
unit part of the core logic and not part of the chipset as before. Migration of the
power and thermal management flow into the processor allows us to use a
hardware coordination mechanism in which each core can request any C-state
it wishes, thus allowing for individual core savings to be maximized. The CPU
C-state is determined and entered based on the lowest common denominator
of both cores' requests, portraying a single CPU entity to the chipset power
management hardware and flows. Thus, software can manage each core
independently, while the actual power management adheres to the platform
and CPU shared resource restrictions. Configuration options are: [C2], [C3],
[C4] and [Disabled]. The default value is [Disabled].
3.4.3 3.4.3

Chipset Configuration

Chipset Configuration
3.4.3 Chipset Configuration 3.4.3 3.4.3 Chipset Configuration Chipset Configuration
BIOS SETUP UTILITY
Advanced
Chipset Settings
Memory Remap Feature
DRAM Frequency
Flexibility Option
Standard Memory Info : 5-5-5-15-36-5-3-3-3
DRAM tCL
DRAM tRCD
DRAM tRP
DRAM tRAS
DRAM tRFC
DRAM tWR
DRAM tWTR
DRAM tRRD
DRAM tRTP
Advanced Memory Info : 18-18-4-4-0-0
DRAM CH0 RCOMP ODT
DRAM CH1 RCOMP ODT
DRAM CH0 tRD
DRAM CH1 tRD
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Memory Remap Feature
Use this item to enable or disable memory remap feature. Configuration
options: [Enabled] and [Disabled]. The default value is [Disabled].
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically. You may select
[333MHz (DDR2 667)], [400MHz (DDR2 800)] or [533MHz (DDR2 1066)] for
DDR2 memory modules, or select [533MHz (DDR3 1066)] or [667MHz (DDR3
1333)] for DDR3 memory modules. The configuration options depend on the
CPU and memory module you adopt on this motherboard. Please refer to page
9 for the CPU FSB frequency and its corresponding memory support frequency.
Flexibility Option
The default value of this option is [Disabled]. It will allow better tolerance for
memory compatibility when it is set to [Enabled].
ENABLE: Allow
[Disabled]
remapping of
[Auto]
overlapped PCI memory
[Disabled]
above the total
physical memory.
[Auto]
[Auto]
DISABLE: Do not allow
[Auto]
remapping of memory.
[Auto]
[Auto]
Select Screen
[Auto]
[Auto] Select Item
+ - Change Option
[Auto]
F1 General Help
[Auto]
F9 Load Defaults
F10 Save and Exit
[Auto]
[Auto] ESC Exit
[Auto]
[Auto]
5 4 5 4 5 4
5 4 5 4