Cpu Configuration - ASROCK P45TS-R User Manual

3.4.2 CPU Configuration

3.4.2 3.4.2 CPU Configuration CPU Configuration CPU Configuration
3.4.2 3.4.2 CPU Configuration
BIOS SETUP UTILITY
Advanced
CPU Configuration
Overclock Mode
[Auto]
CPU Frequency (MHz) [200]
PCIE Frequency (MHz) [100]
Boot Failure Guard [Enabled]
[Auto]
Spread Spectrum
Ratio Status Unlocked (Min: 06, Max: 12)
Ratio Actual Value 12
[12]
Ratio CMOS Setting
[Disabled]
Enhanced Halt State
[Enabled]
Intel (R) Virtualization tech.
[Enabled]
CPU Thermal Throttling
No-Excute Memory Protection [Disabled]
[Enabled]
Hyper Threading Technology
[Auto]
Intel (R) SpeedStep(tm) tech.
[Disabled]
Intel (R) C-STATE tech.
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Overclock Mode
Use this to select Overclock Mode. Configuration options: [Auto], [Manual],
[I.O.T.] and [Optimized]. The default value is [Auto]. If you select [Manual],
Untied Overclocking function is enabled. Please refer to page 44 for the
details of Untied Overclocking Technology. If you select [I.O.T.] (Intelligent
Overclocking Technology), you are allowed to adjust the CPU frequency
and PCIE frequency in the following two items. Therefore, the system will
automatically enable the overclocking function when your CPU is heavy
loaded.
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Spread Spectrum
This item should always be [Auto] for better system stability.
Ratio Status
This is a read-only item, which displays whether the ratio status of this
motherboard is "Locked" or "Unlocked". If it shows "Unlocked", you will find
an item Ratio CMOS Setting appears to allow you changing the ratio
value of this motherboard.
Ratio Actual Value
This is a read-only item, which displays the ratio actual value of this
motherboard.
Ratio CMOS Setting
If the ratio status is unlocked, you will find this item appear to allow you
changing the ratio value of this motherboard. If the CPU you adopt supports
Select the over clock
mode.
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
5 2 5 2 5 2
5 2 5 2