Cpu Configuration - ASROCK N68C-GS UCC User Manual

Hide thumbs Also See for N68C-GS UCC:
Table of Contents

Advertisement

3.4.1

3.4.1 CPU Configuration

3.4.1
CPU Configuration
CPU Configuration
CPU Configuration
3.4.1
3.4.1
CPU Configuration
BIOS SETUP UTILITY
Advanced
CPU Configuration
AM2 Boost
Cool' n' Quiet
Secure Virtual Machine
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
AM2 Boost
This option appears only when you adopt AM2 CPU. If you set this option to
[Enabled], you will enable ASRock AM2 Boost function, which will improve the
memory performance. The default value is [Disabled]. Please refer to cau-
tion 17 on page 10 for details.
Cool 'n' Quiet
Use this item to enable or disable AMD's Cool 'n' Quiet
default value is [Auto]. Configuration options: [Auto], [Enabled] and
[Disabled]. If you install Windows
please set this item to [Enabled]. Please note that enabling this function may
reduce CPU voltage and memory frequency, and lead to system stability or
compatibility issue with some memory modules or power supplies. Please
set this item to [Disable] if above issue occurs.
Secure Virtual Machine
This option appears only when you adopt AM2 CPU. When this option is set
to [Enabled], a VMM (Virtual Machine Architecture) can utilize the additional
hardware capabilities provided by AMD-V. The default value is [Enabled].
Configuration options: [Enabled] and [Disabled].
Enhance Halt State
This option appears only when you adopt Phenom CPU. All processors
support the Halt State (C1). The C1 state is supported through the native
processor instructions HLT and MWAIT and requires no hardware support
from the chipset. In the C1 power state, the processor maintains the con-
text of the system caches.
L3 Cache Allocation
This option appears only when you adopt Phenom CPU. The default value
is [BSP Only]. Configuration options: [BSP Only] and [All Cores].
Options
Enabled
[Disabled]
[Auto]
Disabled
[Enabled]
Select Screen
Select Screen
Select Item
Select Item
+-
+-
Change Option
Change Option
F1
F1
General Help
General Help
F9
F9
Load Defaults
Load Defaults
F10
F10
Save and Exit
Save and Exit
ESC
ESC
Exit
Exit
Vista
and want to enable this function,
®
TM
4 3
4 3
4 3
4 3
4 3
technology. The
TM

Advertisement

Table of Contents
loading

This manual is also suitable for:

N68c-s ucc

Table of Contents