Chipset Configuration - ASROCK K10N78M PRO User Manual

3.4.3 3.4.3 3.4.3

Chipset Configuration

Chipset Configuration Chipset Configuration
3.4.3 3.4.3 Chipset Configuration Chipset Configuration
BIOS SETUP UTILITY
Advanced
Chipset Settings
Onboard LAN
Onboard HDMI HD Audio
Onboard HD Audio
Front Panel
Hybrid SLI
Share Memory
Primary Graphics Adapter
DRAM Voltage
Chipset Voltage
IGPU Boost
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Onboard LAN
This allows you to enable or disable the onboard LAN feature.
Onboard HDMI HD Audio
This allows you to enable or disable the onboard HDMI HD Audio.
Onboard HD Audio
Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio feature. If
you select [Auto], the onboard HD Audio will be disabled when PCI Sound
Card is plugged.
Front Panel
Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio Front Panel.
Hybrid SLI
Adjust this item if you want this motherboard to support Hybrid SLI
function. You are allowed to select this option only when the total capacity
of the memory module you adopt is 512MB and above. Configuration options:
[Disabled], [256MB] and [512MB]. The default value is [Disabled]. If you
select [256MB] or [512MB], you are not allowed to adjust the option "Share
Memory".
Share Memory
This allows you to set share memory feature. The default value is [Auto].
Configuration options: [Auto], [32MB], [64MB], [128MB], [256MB] and [512MB].
To make sure the proper operation of the system, the option [512MB] only
appears when the total capacity of the memory modules you adopt is above
2GB.
Primary Graphics Adapter
This item will switch the PCI Bus scanning order while searching for video
card. It allows you to select the type of Primary VGA in case of multiple video
controllers. The default value of this feature is [PCI]. Configuration options:
[PCI], [Onboard] and [PCI Express].
Configure onboard LAN
device.
[Enabled]
[Disabled]
[Auto]
[Auto]
[Disabled]
[Auto]
[PCI]
[Auto]
Select Screen
[Auto]
Select Item
[Disabled]
+ - Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
5 1 5 1 5 1 5 1 5 1
TM