Cpu Configuration - ASROCK K10N78M PRO User Manual

3.4.1 CPU Configuration

3.4.1 3.4.1 CPU Configuration CPU Configuration CPU Configuration
3.4.1 3.4.1 CPU Configuration
BIOS SETUP UTILITY
Advanced
CPU Configuration
Overclock Mode
CPU Frequency (MHz)
PCIE Frequency (MHz)
CPU/LDT Spread Spectrum
SATA Spread Spectrum
Boot Failure Guard
Cool' n' Quiet
Secure Virtual Machine
Enhanced Halt State
L3 Cache Allocation
Processor Maximum Frequency
North Bridge Maximum Voltage
Processor Maximum Voltage
Multiplier/Voltage Change
HT Bus Speed
HT Bus Width
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
AM2 Boost
This option appears only when you adopt AM2 CPU. If you set this option to
[Enabled], you will enable ASRock AM2 Boost function, which will improve the
memory performance. The default value is [Disabled]. Please refer to
caution 15 on page 9 for details.
Overclock Mode
Use this to select Overclock Mode. The default value is [Auto]. Configuration
options: [Auto], [CPU, PCIE, Sync.], [CPU, PCIE, Async.] and [Optimized].
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency.
CPU/LDT Spread Spectrum
This feature will be set to [Enabled] as default. Configuration options: [Disabled]
and [Enabled].
SATA Spread Spectrum
This feature will be set to [Enabled] as default. Configuration options: [Disabled]
and [Enabled].
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Cool 'n' Quiet
Use this item to enable or disable AMD's Cool 'n' Quiet
default value is [Auto]. Configuration options: [Auto], [Enabled] and
[Disabled]. If you install Windows
please set this item to [Enabled]. Please note that enabling this function may
reduce CPU voltage and memory frequency, and lead to system stability or
compatibility issue with some memory modules or power supplies. Please set
this item to [Disable] if above issue occurs.
If AUTO, multiplier and
voltage will be left at the
[Auto]
rated frequency/voltage. If
[200]
Manual, multiplier and
[100]
voltage will be set based
[Enabled]
on User Selection in Setup.
[Enabled]
[Enabled]
[Auto]
[Enabled]
[Disabled]
Select Screen Select Screen
[Auto]
Select Item Select Item
x11.5 2300 MHz
+- +- Change Option Change Option
x9.0 1800 MHZ
F1 F1 General Help General Help
1.2500 V
F9 F9 Load Defaults Load Defaults
[Auto]
F10 F10 Save and Exit Save and Exit
[Auto]
ESC ESC Exit Exit
[Auto]
® Vista TM and want to enable this function,
4 4 4 4 4 4 4 4 4 4
TM
technology. The