Chipset Configuration - ASROCK G41M-LE-H - V1.0 User Manual

Intel (R) SpeedStep(tm) tech.
Intel (R) SpeedStep(tm) tech. is Intel's new power saving technology.
Processor can switch between multiple frequency and voltage points to
enable powersavings. The default value is [Auto]. Configuration options:
[Auto], [Enabled] and [Disabled]. If you install Windows
[Auto], you need to set the "Power Schemes" as "Portable/Laptop" to en-
able this function. If you install Windows
function, please set this item to [Enabled]. This item will be hidden if the
current CPU does not support Intel (R) SpeedStep(tm) tech..
Please note that enabling this function may reduce CPU voltage and lead to system
stability or compatibility issue with some power supplies. Please set this item to
[Disable] if above issue occurs.
3.4.2 3.4.2

Chipset Configuration

Chipset Configuration
3.4.2 3.4.2 Chipset Configuration 3.4.2 Chipset Configuration Chipset Configuration
BIOS SETUP UTILITY
Advanced
Chipset Configuration
Memory Remap Feature
DRAM Frequency
Flexibility Option
Standard Memory Info : 5-5-5-15-36-5-3-3-3
DRAM tCL
DRAM tRCD
DRAM tRP
DRAM tRAS
DRAM tRFC
DRAM tWR
DRAM tWTR
DRAM tRRD
DRAM tRTP
Advanced Memory Info : 18-54-4-0-0-0
DRAM CH0 RCOMP ODT
DRAM CH1 RCOMP ODT
DRAM CH0 tRD
DRAM CH1 tRD
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Memory Remap Feature
Use this item to enable or disable memory remap feature. Configuration options:
[Enabled] and [Disabled]. The default value is [Disabled].
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) in-
serted and assigns appropriate frequency automatically. You may select
[333MHz (DDR2 667)], [400MHz (DDR2 800)] or [533MHz (DDR2 1066)]. The
configuration options depend on the CPU and memory module you adopt on
this motherboard. Please refer to page 8 for the CPU FSB frequency and its
corresponding memory support frequency.
Flexibility Option
The default value of this option is [Disabled]. It will allow better tolerance for
memory compatibility when it is set to [Enabled].
Standard Memory Info : 5-5-5-15-36-5-3-3-3
Vista and want to enable this
® TM
ENABLE: Allow
[Disabled]
remapping of
[Auto]
overlapped PCI memory
[Disabled]
above the total
physical memory.
[Auto]
[Auto]
DISABLE: Do not allow
[Auto]
remapping of memory.
[Auto]
[Auto]
Select Screen
[Auto]
[Auto] Select Item
+ - Change Option
[Auto]
[Auto] F1 General Help
F9 Load Defaults
F10 Save and Exit
[Auto]
[Auto] ESC Exit
[Auto]
[Auto]
3 2 3 2 3 2
3 2 3 2
XP and select
®