Download
Share
Print this page
  1. Manuals
  2. Brands
  3. ASROCK Manuals
  4. Motherboard
  5. G41M-S
  6. User manual

ASROCK G41M-S User Manual

Hide thumbs Also See for G41M-S:

Advertisement

Quick Links

Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or trans-
lated in any language, in any form or by any means, except duplication of documen-
tation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identifica-
tion or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or omissions
that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any kind,
either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose. In no event shall
ASRock, its directors, officers, employees, or agents be liable for any indirect, special,
incidental, or consequential damages (including damages for loss of profits, loss of
business, loss of data, interruption of business and the like), even if ASRock has been
advised of the possibility of such damages arising from any defect or error in the guide
or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate"
ASRock Website: http://www.asrock.com
Copyright©2009 ASRock INC. All rights reserved.
ASRock G41M-S Motherboard
Published July 2009
1 1 1 1 1

Advertisement

loading

Related Manuals for ASROCK G41M-S

Summary of Contents for ASROCK G41M-S

  • Page 1 ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.

  • Page 2: Layout

    System Panel Header (PANEL1, Orange) North Bridge Controller BIOS SPI Chip CPU Fan Connector (CPU_FAN1) Chassis Fan Connector (CHA_FAN1) 2 x 240-pin DDR2 DIMM Slots Floppy Connector (FLOPPY1) (Dual Channel: DDRII_1, DDRII_2; Yellow) EUP Audio Jumper (EUP_AUDIO1) ATX Power Connector (ATXPWR1)
  • Page 3 Line Out (Lime) PS/2 Keyboard Port (Purple) * To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. Please refer to below steps for the software setting of Multi-Streaming. For Windows ®...
  • Page 4 This Quick Installation Guide contains introduction of the motherboard and step-by-step installation guide. More detailed information of the motherboard can be found in the user manual presented in the Support CD. Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice.
  • Page 5 Specifications Specifications Specifications Specifications Specifications Platform - Micro ATX Form Factor: 9.6-in x 7.6-in, 24.4 cm x 19.3 cm ® - LGA 775 for Intel Core 2 Extreme / Core 2 Quad / Core ® ® ® 2 Duo / Pentium...
  • Page 6 Connector - 4 x SATAII 3.0 Gb/s connectors (No Support for RAID and “Hot Plug” functions) (see CAUTION 8) - 1 x ATA100 IDE connector (supports 2 x IDE devices) - 1 x Floppy connector - 1 x Print port header...
  • Page 7 Before installing SATAII hard disk to SATAII connector, please read the “SATAII Hard Disk Setup Guide” on page 24 of “User Manual” in the support CD to adjust your SATAII hard disk drive to SATAII mode. You can also connect SATA hard disk to SATAII connector directly.
  • Page 8 MS-DOS or Windows . With this utility, you can press <F6> key during the POST or press <F2> key to BIOS setup menu to access ASRock Instant Flash. Just launch this tool and save the new BIOS file to your USB flash drive, floppy disk or hard drive, then you can update your BIOS only in a few clicks without prepar- ing an additional floppy diskette or other complicated flash utility.

  • Page 9: Cpu Installation

    Before you insert the 775-LAND CPU into the socket, please check if the CPU surface is unclean or if there is any bent pin on the socket. Do not force to insert the CPU into the socket if above situation is found.
  • Page 10 775-LAND CPU For proper inserting, please ensure to match the two orientation key notches of the CPU with the two alignment keys of the socket. Step 2-3. Carefully place the CPU into the socket by using a purely vertical motion.
  • Page 11 1. It is recommended to use the cap tab to handle and avoid kicking off the PnP cap. 2. This cap must be placed if returning the motherboard for after service. Step 4. Close the socket: Step 4-1. Rotate the load plate onto the IHS.
  • Page 12 Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
  • Page 13 2.4 Expansion Slots (PCI and PCI Express Slots) 2.4 Expansion Slots (PCI and PCI Express Slots) There are 2 PCI slots and 2 PCI Express slots on this motherboard. PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. PCIE slots: PCIE1 (PCIE x1 slot) is used for PCI Express cards with x1 lane width cards, such as Gigabit LAN card, SATA2 card, etc.
  • Page 14 2-pin jumper (see p.2 No. 8) Note: CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS includes system setup information such as system password, date, time, and system setup parameters. To clear and reset the system parameters to default setup, please turn off the computer and unplug the power cord from the power supply.
  • Page 15 When you mount a FSB800 or FSB1066 CPU, and try to overclock to FSB1333 (by BIOS setting) you may face the problem, that DRAM frequency will be overclocked very high. Please use jumper to force NB to be strapped at higher frequency, so the DRAM can work at lower frequency.
  • Page 16 FDD connector (33-pin FLOPPY1) (see p.2 No. 20) the red-striped side to Pin1 Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the connector. Primary IDE connector (Blue) (39-pin IDE1, see p.2 No. 7)
  • Page 17 HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system. 2. If you use AC’97 audio panel, please install it to the front panel audio header as below: A.
  • Page 18 Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3.
  • Page 19 (see p.2 No. 6) Though this motherboard provides 24-pin ATX power connector, it can still work if you adopt a traditional 20-pin ATX power supply. To use the 20-pin ATX power supply, please plug your power supply along with Pin 1 and Pin 13.

  • Page 20: Untied Overclocking Technology

    STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk. STEP 3: Connect one end of the SATA data cable to the motherboard’s SATAII connector. STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard disk. Driver Installation Guide...
  • Page 21 To begin using the Support CD, insert the CD into your CD-ROM drive. It will display the Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main Menu does not appear automatically, locate and double-click on the file “ASSETUP.
  • Page 22 1. Einführung 1. Einführung 1. Einführung Wir danken Ihnen für den Kauf des ASRock G41M-S Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.
  • Page 23 1 . 2 Spezifikationen Spezifikationen Spezifikationen Spezifikationen Spezifikationen Plattform - Micro ATX-Formfaktor: 24.4 cm x 19.3 cm; 9.6 Zoll x 7.6 Zoll ® - LGA 775 für Intel Core 2 Extreme / Core 2 Quad / Core 2 Duo / Pentium ®...
  • Page 24 - CPU/Gehäuse-Lüfteranschluss - 24-pin ATX-Netz-Header - 4-pin anschluss für 12V-ATX-Netzteil - Anschluss für Audio auf der Gehäusevorderseite - 2 x USB 2.0 Buchse (unterstützt 4 USB 2.0 Ports) (siehe VORSICHT 9) BIOS - 8Mb AMI BIOS - AMI legal BIOS mit Unterstützung für “Plug and Play”...
  • Page 25 Beachten Sie bitte, dass Overclocking, einschließlich der Einstellung im BIOS, Anwenden der Untied Overclocking-Technologie oder Verwenden von Overclocking-Werkzeugen von Dritten, mit einem gewissen Risiko behaftet ist. Overclocking kann sich nachteilig auf die Stabilität Ihres Systems auswirken oder sogar Komponenten und Geräte Ihres Systems beschädigen.
  • Page 26 Shutdown durch. Bevor Sie das System neu starten, prüfen Sie bitte, ob der CPU-Lüfter am Motherboard richtig funktioniert, und stecken Sie bitte den Stromkabelstecker aus und dann wieder ein. Um die Wärmeableitung zu verbessern, bitte nicht vergessen, etwas Wärmeleitpaste zwischen CPU und Kühlkörper zu sprühen.
  • Page 27 +5VSB (Standby) zu setzen (siehe S.2 - No. 1) und die PS/2 oder USB- Weckfunktionen zu aktivieren. Hinweis: Um +5VSB nutzen zu können, muss das Netzteil auf dieser Leitung 2A oder mehr leisten können. CMOS löschen (CLRCMOS1, 2-Pin jumper) 2-Pin jumper (siehe S.2 - No.
  • Page 28 Motherboard gemäß der Ökodesign-Richtlinie (EuP) und einer Stromversorgung, deren 5 VSB-Energieeffizienz der Standby-Spannung bei einer Stromaufnahme von 100 mA höher ist als 50%, ist Ihr System befähigt, sich dem Standard der Ökodesign-Richtlinie (EuP) auszusetzen. Die Standardeinstellung ist EuP-aktiviert (Pin 1 und Pin 2 sind geschlossen).
  • Page 29 Wenn Sie die CPU zur Nutzung von FSB1066 mit diesem Motherboard übertakten möchten, müssen Sie Steckbrückeneinstellungen ändern. Bitte überbrücken Sie die Pins 4 und 5 der Steckbrücke FSB2 und die Pins 4 und 5 der Steckbrücke FSB3. Andernfalls arbeitet die CPU eventuell nicht richtig mit Ihrem Motherboard.
  • Page 30 (33-Pin FLOPPY1) die rotgestreifte Seite auf Stift 1 (siehe S.2 - No. 20) Hinweis: Achten Sie darauf, dass die rotgestreifte Seite des Kabel mit der Stift 1- Seite des Anschlusses verbunden wird. Primärer IDE-Anschluss (Blauer) (39-pin IDE1, siehe S.2 - No. 7)
  • Page 31 Geräte), wobei jedoch die Bildschirmverdrahtung am Gehäuse HDA unterstützen muss, um richtig zu funktionieren. Beachten Sie bei der Installation im System die Anweisungen in unserem Handbuch und im Gehäusehandbuch. 2. Wenn Sie die AC’97-Audioleiste verwenden, installieren Sie diese wie...
  • Page 32 Erweiterte Einstellungen und wählen Sie Chipset-Konfiguration. Setzen Sie die Option Frontleistenkontrolle von [Automatisch] auf [Aktiviert]. F. Rufen Sie das Windows-System auf. Klicken Sie auf das Symbol in der Taskleiste unten rechts, um den Realtek HD Audio-Manager aufzurufen. Für Windows ®...
  • Page 33 Obwohl dieses Motherboard einen 24-pol. ATX-Stromanschluss bietet, kann es auch mit einem modifizierten traditionellen 20-pol. ATX-Netzteil verwendet werden. Um ein 20-pol. ATX-Netzteil zu verwenden, stecken Sie den Stecker mit Pin 1 und Pin 13 ein. Installation eines 20-pol. ATX-Netzteils Anschluss für...
  • Page 34 Erscheint der Wilkommensbildschirm nicht, so “doppelklicken” Sie bitte auf das File ASSETUP.EXE im BIN-Verzeichnis der Support-CD, um die Menüs aufzurufen. Das Setup-Programm soll es Ihnen so leicht wie möglich machen. Es ist menügesteuert, d.h. Sie können in den verschiedenen Untermenüs Ihre Auswahl treffen und die Programme werden dann automatisch installiert.
  • Page 35 1.1 Contenu du paquet Carte mère ASRock G41M-S (Facteur de forme Micro ATX: 9.6 pouces x 7.6 pouces, 24.4 cm x 19.3 cm) Guide d’installation rapide ASRock G41M-S CD de soutien ASRock G41M-S Un câble ruban IDE Ultra ATA 66/100 80 conducteurs (en option) Un câbles d’alimentation de série ATA (SATA) HDD (en option)
  • Page 36 - FSB1333/1066/800/533 MHz (voir ATTENTION 1) - Prise en charge de la technologie Hyper-Threading (voir ATTENTION 2) - Prend en charge la technologie Untied Overclocking (voir ATTENTION 3) - Prise en charge de la technologie EM64T par le CPU ® Chipsets - Northbridge: Intel ®...
  • Page 37 Connecteurs - 4 x connecteurs SATAII, prennent en charge un taux de transfert de données pouvant aller jusqu’à 3.0Go/s (Ne supporte pas les fonctions “RAID” et “Hot-Plug” (Connexion à chaud)) (voir ATTENTION 8) - 1 x ATA100 IDE connecteurs (prend en charge jusqu’à 2 périphériques IDE) - 1 x Port Disquette - 1 x embase de port d’impression...
  • Page 38 * Pour de plus amples informations sur les produits, s’il vous plaît visitez notre site web: http://www.asrock.com ATTENTION Il est important que vous réalisiez qu’il y a un certain risque à effectuer l’overclocking, y compris ajuster les réglages du BIOS, appliquer la technologie Untied Overclocking, ou utiliser des outils de tiers pour l’overclocking.
  • Page 39 Avant d’installer le disque dur SATAII au connecteur SATAII, veuillez lire le Guide « Installation du disque dur SATAII » à la page 24 du « Manuel de l’utilisateur » qui se trouve sur le CD de support pour régler votre lecteur de disque dur SATAII au mode SATAII.
  • Page 40 EuP sont requises. Selon les suggestions d’Intel’, l’alimentation électrique EuP doit correspondre à la norme, qui est que l’efficacité électrique de 5v en mode de veille doit être supérieure à 50% pour 100 mA de consommation de courant. Pour choisir une alimentation électrique conforme à...
  • Page 41 électrique dont l’efficacité électrique 5Vsb est supérieure à 50% pour une consommation de courant de 100 mA, votre système sera conforme à la norme EuP. Le réglage par défaut (codes pin1 et pin2) est activé pour être conforme à EuP. Si vous souhaitez désactiver cette fonction de sauvegarde de l’énergie, vous pouvez changez les codes pin2 et pin3.
  • Page 42 Si vous voulez overclocker le CPU que vous adoptez vers un FSB1066 sur cette carte mère, vous devez régler les cavaliers. Veuillez court-circuiter pin4, pin5 pour le cavalier FSB2 et pin4, pin5 pour le cavalier FSB3. Sinon, le CPU pourrait ne pas fonctionner correctement sur cette carte mère. Veuillez vous référer aux réglages de cavaliers ci-dessous.
  • Page 43 (FLOPPY1 br. 33) (voir p.2 No. 20) le côté avec fil rouge côté Broche1 Note: Assurez-vous que le côté avec fil rouge du câble est bien branché sur le côté Broche1 du connecteur. Connecteur IDE primaire (Bleu) (IDE1 br. 39, voir p.2 No. 7)
  • Page 44 1. L’audio à haute définition (HDA) prend en charge la détection de fiche, mais le fil de panneau sur le châssis doit prendre en charge le HDA pour fonctionner correctement. Veuillez suivre les instructions dans notre manuel et le manuel de châssis afin installer votre système.
  • Page 45 Configuration du jeu de puces. Définir l’option panneau de commande de [Auto] à [Activé]. F. Entrer dans le système Windows. Cliquer sur l’icône sur la barre de tâches dans le coin inférieur droite pour entrer dans le Gestionnaire audio Realtek HD.
  • Page 46 (voir p.2 No. 4) ien que cette carte mère offre un support de (Ventilateur silencieux) ventilateur de CPU à 4 broches , le ventilateur de CPU à 3 broches peut bien fonctionner même sans la fonction de commande de vitesse du ventilateur.
  • Page 47 BIOS après le POST, veuillez redémarrer le système en pressant <Ctl> + <Alt> + <Suppr>, ou en pressant le bouton de reset sur le boîtier du système. Vous pouvez également redémarrer en éteignant le système et en le rallumant.
  • Page 48 Grazie per aver scelto una scheda madre ASRock G41M-S, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza.
  • Page 49 Specifiche Specifiche Specifiche 1 . 2 1 . 2 Specifiche Piattaforma - Micro ATX Form Factor: 9.6-in x 7.6-in, 24.4 cm x 19.3 cm Processore - LGA 775 per Intel ® Core 2 Extreme / Core 2 Quad / Core ®...
  • Page 50 Connettori - 4 x connettori SATAII 3.0Go/s (Non supporta le funzioni “RAID” e “Collegamento a caldo”) (vedi ATTENZIONE 8) - 1 x connettori ATA100 IDE (supporta fino a 2 dispositivi IDE) - 1 x porta Floppy - 1 x Collettore porta stampante...
  • Page 51 AVVISO Si prega di prendere atto che la procedura di overclocking implica dei rischi, come anche la regolazione delle impostazioni del BIOS, l’applicazione della tecnologia Untied Overclocking Technology, oppure l’uso di strumenti di overclocking forniti da terzi. L’overclocking può influenzare la stabilità del sistema, ed anche provocare danni ai componenti ed alle periferiche del sistema.
  • Page 52 64-bit / Vista / XP 64 bit / XP SP1; SP2/2000 SP4. 10. Si tratta di uno strumento di sicronizzazione ASRock di face uso in grado di implementare il controllo del sistema tramite la funzione di hardware monitor e sincronizzare le Vostre unita‘ hardware per ottenere la migliore ®...
  • Page 53 Nota: CLRCMOS1 consente di pulire i dati nella CMOS. I dati nella CMOS includono informazioni del setup del sistema, come per esempio la password di sistema, la data, l’ora, e i parametri del setup di sistema. Per pulire I parametri di sistema e resettare ai parametri di default, spegnere il computer e scollegare l’alimentatore, poi collegare il jumper sul CLRCMOS1 per 5 secondi.
  • Page 54 (jumper). Mettere in corto i piedini 4, 5 per il ponticello FSB2 ed i piedini 4, 5 per il ponticello FSB3. In caso contrario la CPU potrebbe non funzionare correttamente su questa scheda madre. Fare riferimento alle impostazioni dei ponticelli riportate sotto.
  • Page 55 (33-pin FLOPPY1) (vedi p.2 Nr. 20) Lato del Pin1 con la striscia rossa Nota: Assicurarsi che il lato del cavo con la striscia rossa sia inserito nel lato Pin1 del connettore. Connettore IDE primario (Blu) (39-pin IDE1, vedi p.2 Nr. 7)
  • Page 56 1. La caratteristica HDA (High Definition Audio) supporta il rilevamento dei connettori, però il pannello dei cavi sul telaio deve supportare la funzione HDA (High Definition Audio) per far sì che questa operi in modo corretto. Attenersi alle istruzioni del nostro manuale e del manuale del telaio per installare il sistema.
  • Page 57 B. Collegare Audio_R (RIN) a OUT2_R e Audio_L (LIN) ad OUT2_L. C. Collegare Ground (GND) a Ground (GND). D. MIC_RET e OUT_RET sono solo per il pannello audio HD. Non è necessario collegarli per il pannello audio AC’97. E. Entrare nel programma di impostazione BIOS. Entrare su Impostazioni avanzate, quindi selezionare Configurazione chipset.
  • Page 58 Sebbene la presente scheda madre disponga di un supporto per ventola CPU a 4 piedini (ventola silenziosa), la ventola CPU a 3 piedini è in grado di funzionare anche senza la funzione di controllo della velocità della ventola. Se si intende collegare la ventola CPU a 3 piedini al connettore della ventola CPU su questa scheda madre, collegarla ai piedini 1-3.
  • Page 59 BIOS; altrimenti, POST continua con i suoi test di routine. Per entrare il BIOS Setup dopo il POST, riavvia il sistema premendo <Ctl> + <Alt> + <Delete>, o premi il tasto di reset sullo chassis del sistema. Per informazioni più dettagliate circa il Setup del BIOS, fare riferimento al Manuale dell’Utente (PDF file) contenuto nel cd di...
  • Page 60 ASRock. Esta Guía rápida de instalación contiene una introducción a la placa base y una guía de instalación paso a paso. Puede encontrar una información más detallada sobre la placa base en el manual de usuario incluido en el CD de soporte.
  • Page 61 1 . 2 1 . 2 Especificación Especificación Especificación Especificación Especificación Plataforma - Factor forma Micro ATX: 24,4 cm x 19,3 cm, 9,6” x 7,6” ® Procesador - LGA 775 para Intel Core 2 Extreme / Core 2 Quad / Core ®...
  • Page 62 - 24-pin cabezal de alimentación ATX - 4-pin conector de ATX 12V power - Conector de audio de panel frontal - 2 x Conector USB 2.0 (compatible con 4 puertos USB 2.0) (vea ATENCIÓN 9) BIOS - 8Mb AMI BIOS - AMI legal BIOS - Soporta “Plug and Play”...
  • Page 63 ADVERTENCIA Tenga en cuenta que hay un cierto riesgo implícito en las operaciones de aumento de la velocidad del reloj, incluido el ajuste del BIOS, aplicando la tecnología de aumento de velocidad liberada o utilizando las herramientas de aumento de velocidad de otros fabricantes.
  • Page 64 Antes de instalar un disco duro SATAII en el conector SATAII, consulte la sección “Guía de instalación de discos duros SATAII” en la página 24 del “Manual de usuario” que se incluye en el CD de soporte para configurar su disco duro SATAII en modo SATAII. También puede conectar un disco duro SATA directamente al conector SATAII.
  • Page 65 3 para habilitar +5VSB (vea p.2, N. 1) (standby) para PS/2 o USB wake up events. Atención: Para elegir +5VSB, se necesita corriente mas que 2 Amp proveida por la fuente de electricidad. Limpiar CMOS (CLRCMOS1, jumper de 2 pins) jumper de 2 pins (vea p.2, N.
  • Page 66 Si adopta la siguiente configuración DRAM / CPU en esta placa base, necesitará ajustar los puentes. Por favor, siga las instrucciones indicadas a continuación para configurar los puentes. De otra forma, puede que la CPU y el módulo de memoria no funcionen adecuadamente en esta placa base.
  • Page 67 Por favor, cortocircuite el pin 4 y el pin5 para el puente FSB2 y el pin4 y el pin5 para el puente FSB3. Si no lo hace así, puede que la CPU no funcione adecuadamente en esta placa base. Por favor, consulte las siguientes configuraciones de puente.
  • Page 68 (vea p.2, N. 20) la banda roja debe quedar en el mismo lado que el contacto 1 Atención: Asegúrese que la banda roja del cable queda situado en el mismo lado que el contacto 1 de la conexión. IDE conector primario (Azul) (39-pin IDE1, vea p.2, N.
  • Page 69 2. Si utiliza el panel de sonido AC’97, instálelo en la cabecera de sonido del panel frontal de la siguiente manera: A. Conecte Mic_IN (MIC) a MIC2_L.
  • Page 70 En el panel de control frontal cambie la opción [Automático] a [Habilitado]. F. Entre en el sistema Windows. Haga clic en el icono de la barra de tareas situada en la parte inferior derecha para entrar en el Administrador de audio HD Realtek.
  • Page 71 Si pretende enchufar el ventilador de procesador de 3 contactos en el conector del ventilador de procesador de esta placa base, conéctelo al contacto 1-3. Contacto 1-3 conectado Instalación del ventilador de 3 contactos...
  • Page 72 Para iniciar la instalación, ponga el CD en el lector de CD y se desplegará el Menú Principal automáticamente si «AUTORUN» está habilitado en su computadora. Si el Menú...
  • Page 73 Gratos por comprar nossa placa–mãe G41M-S, um produto confiável feito com ASRock um estrito controle de qualidade consistente. Com um excelente desempenho, essa placa é dotada de um projeto robusto que atende a ASRock de compromisso com a qualidade e durabilidade.
  • Page 74 1.2 Especificações 1.2 Especificações 1.2 Especificações 1.2 Especificações 1.2 Especificações Plataforma - Formato Micro ATX: 9,6 pol. x 7,6 pol., 24,4 cm x 19,3 cm ® - Socket Intel Dual Core Core 2 Extreme / Core 2 Quad / ®...
  • Page 75 - Medição de temperatura da placa-mãe - Tacômetros de ventilador do Processador - Tacômetros de ventilador do chassis - Ventoinha silenciosa para a CPU - Monitoramento de voltagem : +12 V, +5 V, +3.3 V, Vcore Sistema - Microsoft ®...
  • Page 76 AVISO Tenha em atenção que a operação de overclocking envolve alguns riscos, nomeadamente no que diz respeito ao ajuste das definições do BIOS, à aplicação da tecnologia Untied Overclocking ou à utilização de ferramentas de overclocking de terceiros. O overclocking pode afectar a estabilidade do seu sistema ou até...
  • Page 77 Antes de instalar o disco duro SATAII no conector SATAII, por favor leia o “Guia de Instalação do Disco duro SATAII” na página 24 do Manual do Usuário no CD de suporte, para definir a sua unidade de disco duro SATAII com o modo SATAII.
  • Page 78 (veja a folha 2, No. 1) para PS/2 ou eventos de wake up na USB. Nota: Para escolher +5VSB, é preciso uma corrente de stand by de 2 A ou mais. Restaurar CMOS (CLRCMOS1, jumper de 2 pinos) jumper de 2 pinos (veja a folha 2, No.
  • Page 79 FSB1333 (através das definições da BIOS) pode encontrar o problema de a frequência DRAM ser sujeito a um overclock demasiado elevado. Utilize por favor os jumpers para forçar a NB a ser puxada a uma frequência maior para que a DRAM possa funcionar a uma frequência menor.
  • Page 80 Se quiser fazer o overclock ao CPU que adopter para FSB1066 nesta placa-mãe, tem de ajustar os jumpers. Faça a conexão do pino 4, pino 5 para o jumper de FSB2, o pino 4,pino 5 para o jumper de FSB3. Caso contrário, o CPU pode não funcionar devidamente nesta placa-mãe.
  • Page 81 (FLOPPY 1, 33 pinos) (veja a folha 2, No. 20) o lado com listras vermelhas para o Pino 1 Nota: Certifique-se de que o lado com listras vermelhas no cabo seja conectado ao lado Pino 1 do conector. Conector primário (Azul) (IDE1 de 39 pinos, veja a folha 2, No.
  • Page 82 Siga s instruções que aparecem no manual e no manual do chassis para instalar o sistema. 2. Se utilizar o painel de áudio AC’97, instale-o no cabeçalho de áudio do painel frontal, como a figura abaixo mostra: A. Ligue o Mic_IN (MIC) ao MIC2_L.
  • Page 83 C. Ligue o Ground (GND) ao Ground (GND). D. MIC_RET e OUT_RET são apenas para o painel de áudio HD. Não necessita de os ligar para o painel de áudio AC’97. E. Entre no utilitário de configuração do BIOS. Vá até à opção Definições avançadas e escolha Configuração do chipset.
  • Page 84 (Ventoinha silenciosa), uma ventoinha de 3 pinos para CPU poderá funcionar mesmo sem a função de controlo de velocidade da ventoinha. Se pretender ligar uma ventoinha de 3 pinos para CPU ao conector de ventoinha do CPU nesta placa-mãe, por favor, ligue-a aos pinos 1-3.
  • Page 85 Mãe contem: drivers e utilitários necessários para um melhor desempenho da placa Mãe. Para começar a usar o CD de instalação, introduza o CD na leitora de CD-ROM do computador. Automaticamente iniciará o menu principal, casa o AUTORUN esteja ativado.
  • Page 86 ASRock G41M-S Motherboard...
  • Page 87 ® ® ® ® ® ® ® ® ASRock G41M-S Motherboard...
  • Page 88 ® 1 0 0 1 0 0 1 0 0 1 0 0 1 0 0 ASRock G41M-S Motherboard...
  • Page 89 “ ” ® ® ® ® ® “ ” “ ” 1 0 1 1 0 1 1 0 1 1 0 1 1 0 1 ASRock G41M-S Motherboard...
  • Page 90 ® ® 1 0 2 1 0 2 1 0 2 1 0 2 1 0 2 ASRock G41M-S Motherboard...
  • Page 91 “ ” “ ” “ ” “ ” 1 0 3 1 0 3 1 0 3 1 0 3 1 0 3 ASRock G41M-S Motherboard...
  • Page 92 1 0 4 1 0 4 1 0 4 1 0 4 1 0 4 ASRock G41M-S Motherboard...
  • Page 93 1 0 5 1 0 5 1 0 5 1 0 5 1 0 5 ASRock G41M-S Motherboard...
  • Page 94 1 0 6 1 0 6 1 0 6 1 0 6 1 0 6 ASRock G41M-S Motherboard...
  • Page 95 ® ® ® ® “ ” “ ” “ ” “ ” ® “ ” “ ” 4 3 2 1 1 0 7 1 0 7 1 0 7 1 0 7 1 0 7 ASRock G41M-S Motherboard...
  • Page 96 1 0 8 1 0 8 1 0 8 1 0 8 1 0 8 ASRock G41M-S Motherboard...
  • Page 97 “ ” “ ” 1 0 9 1 0 9 1 0 9 1 0 9 1 0 9 ASRock G41M-S Motherboard...
  • Page 98 1 1 0 1 1 0 1 1 0 1 1 0 1 1 0 ASRock G41M-S Motherboard...
  • Page 99 ® ® ® ® ® ® ® ® 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ASRock G41M-S Motherboard...
  • Page 100 ® ® 1 1 2 1 1 2 1 1 2 1 1 2 1 1 2 ASRock G41M-S Motherboard...
  • Page 101 “ ” ® ® ® ® ® 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 ASRock G41M-S Motherboard...
  • Page 102 ® ® ® ® 1 1 4 1 1 4 1 1 4 1 1 4 1 1 4 ASRock G41M-S Motherboard...
  • Page 103 1 1 5 1 1 5 1 1 5 1 1 5 1 1 5 ASRock G41M-S Motherboard...
  • Page 104 1 1 6 1 1 6 1 1 6 1 1 6 1 1 6 ASRock G41M-S Motherboard...
  • Page 105 1 1 7 1 1 7 1 1 7 1 1 7 1 1 7 ASRock G41M-S Motherboard...
  • Page 106 1 1 8 1 1 8 1 1 8 1 1 8 1 1 8 ASRock G41M-S Motherboard...
  • Page 107 ® ® ® ® ® 4 3 2 1 1 1 9 1 1 9 1 1 9 1 1 9 1 1 9 ASRock G41M-S Motherboard...
  • Page 108 1 2 0 1 2 0 1 2 0 1 2 0 1 2 0 ASRock G41M-S Motherboard...
  • Page 109 ® ® 1 2 1 1 2 1 1 2 1 1 2 1 1 2 1 ASRock G41M-S Motherboard...
  • Page 110 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 ASRock G41M-S Motherboard...
  • Page 111 ® ® ® ® ® ® ® ® 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 ASRock G41M-S Motherboard...
  • Page 112 ® ® 1 2 4 1 2 4 1 2 4 1 2 4 1 2 4 ASRock G41M-S Motherboard...
  • Page 113 ® ® ® ® ® ® ® 1 2 5 1 2 5 1 2 5 1 2 5 1 2 5 ASRock G41M-S Motherboard...
  • Page 114 ® ® 1 2 6 1 2 6 1 2 6 1 2 6 1 2 6 ASRock G41M-S Motherboard...
  • Page 115 1 2 7 1 2 7 1 2 7 1 2 7 1 2 7 ASRock G41M-S Motherboard...
  • Page 116 1 2 8 1 2 8 1 2 8 1 2 8 1 2 8 ASRock G41M-S Motherboard...
  • Page 117 1 2 9 1 2 9 1 2 9 1 2 9 1 2 9 ASRock G41M-S Motherboard...
  • Page 118 ® ® ® ® 4 3 2 1 1 3 0 1 3 0 1 3 0 1 3 0 1 3 0 ASRock G41M-S Motherboard...
  • Page 119 1 3 1 1 3 1 1 3 1 1 3 1 1 3 1 ASRock G41M-S Motherboard...
  • Page 120 ® ® 1 3 2 1 3 2 1 3 2 1 3 2 1 3 2 ASRock G41M-S Motherboard...
  • Page 121 1 3 3 1 3 3 1 3 3 1 3 3 1 3 3 ASRock G41M-S Motherboard...
  • Page 122 1 3 4 1 3 4 1 3 4 1 3 4 1 3 4 ASRock G41M-S Motherboard...
  • Page 123 ® ® ® ® ® ® ® ® 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 ASRock G41M-S Motherboard...
  • Page 124 ® ® 1 3 6 1 3 6 1 3 6 1 3 6 1 3 6 ASRock G41M-S Motherboard...
  • Page 125 ® ® ® ® ® ® ® 1 3 7 1 3 7 1 3 7 1 3 7 1 3 7 ASRock G41M-S Motherboard...
  • Page 126 ® ® 1 3 8 1 3 8 1 3 8 1 3 8 1 3 8 ASRock G41M-S Motherboard...
  • Page 127 1 3 9 1 3 9 1 3 9 1 3 9 1 3 9 ASRock G41M-S Motherboard...
  • Page 128 1 4 0 1 4 0 1 4 0 1 4 0 1 4 0 ASRock G41M-S Motherboard...
  • Page 129 1 4 1 1 4 1 1 4 1 1 4 1 1 4 1 ASRock G41M-S Motherboard...
  • Page 130 ® 1 4 2 1 4 2 1 4 2 1 4 2 1 4 2 ASRock G41M-S Motherboard...
  • Page 131 ® ® ® ® 4 3 2 1 1 4 3 1 4 3 1 4 3 1 4 3 1 4 3 ASRock G41M-S Motherboard...
  • Page 132 ® ® ® 1 4 4 1 4 4 1 4 4 1 4 4 1 4 4 ASRock G41M-S Motherboard...