Jumpers Setup - ASROCK G41M-LE-H - V1.0 User Manual

2.7 Jumpers Setup

2.7 Jumpers Setup 2.7 Jumpers Setup
2.7 Jumpers Setup 2.7 Jumpers Setup
The illustration shows how jumpers are setup.
When the jumper cap is placed on
pins, the jumper is "Short". If no jumper cap is
placed on pins, the jumper is "Open". The il-
lustration shows a 3-pin jumper whose pin1
and pin2 are "Short" when jumper cap is placed
on these 2 pins.
Jumper
PS2_USB_PWR1
1_2
(see p.11 No. 1)
Note: To select +5VSB, it requires 2 Amp and higher standby current provided by power
supply.
Clear CMOS
(CLRCMOS1, 2-pin jumper)
(see p.11 No. 21)
Note: CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS includes
system setup information such as system password, date, time, and system
setup parameters. To clear and reset the system parameters to default setup,
please turn off the computer and unplug the power cord from the power supply.
After waiting for 15 seconds, use a jumper cap to short 2 pins on CLRCMOS1 for
5 seconds.
FSB1 Jumper
(FSB1, 3-pin jumper, see p.11 No. 30)
FSB2 Jumper
(FSB2, 5-pin jumper, see p.11 No. 29)
FSB3 Jumper
(FSB3, 5-pin jumper, see p.11 No. 4)
Setting
2_3
+5V +5VSB
2-pin jumper
1_2
FSB3
FSB2
1_2
FSB1
1 9 1 9 1 9
1 9 1 9
Description
Short pin2, pin3 to enable
+5VSB (standby) for PS/2
or USB wake up events.
Default