Usb Configuration - ASROCK CORE 100HT User Manual

7.4.5

7.4.5 USB Configuration

7.4.5 7.4.5 7.4.5 USB Configuration USB Configuration USB Configuration USB Configuration
BIOS SETUP UTILITY
Advanced
USB Configuration
USB Controller [Enabled]
Legacy USB Support [Enabled]
USB 2.0 Rate Matching hub [Enabled]
USB Keyboard/Remote Power On [Disabled]
[Disabled]
USB Mouse Power On
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
USB Controller
Use this item to enable or disable the use of USB controller.
Legacy USB Support
Use this option to select legacy support for USB devices. There are four
configuration options: [Enabled], [Auto], [Disabled] and [BIOS Setup
Only]. The default value is [Enabled]. Please refer to below descriptions
for the details of these four options:
[Enabled] - Enables support for legacy USB.
[Auto] - Enables legacy support if USB devices are connected.
[Disabled] - USB devices are not allowed to use under legacy OS and
BIOS setup when [Disabled] is selected. If you have USB compatibility
issue, it is recommended to select [Disabled] to enter OS.
[BIOS Setup Only] - USB devices are allowed to use only under BIOS
setup and Windows / Linux OS.
USB 2.0 Rate Matching hub
Use this item to enable or disable the USB 2.0 Rate Matching hub.
Due to WinXP and PCH chipset (HM55) limitations, if you use
WinXP, please disable the BIOS option "USB2.0 Rate Matching
Hub" to make USB devices work properly. (For example, in the
process of installing WinXP or using USB3.0 devices.)
USB Keyboard/Remote Power On
Use this item to enable or disable USB Keyboard/Remote Power On on the
system.
USB Mouse Power On
Use this item to enable or disable USB Mouse Power On on the system.
To enable or disable
the onboard USB
controllers.
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
4 7 4 7 4 7
4 7 4 7