Oc Tweaker Screen - ASROCK CORE 100HT User Manual

7.3 7.3 OC T 7.3 OC T OC Tweak OC T weak weaker Screen weak er Screen er Screen er Screen
7.3 7.3 OC T weak er Screen
In the OC Tweaker screen, you can set up overclocking features.
Main OC Tweaker
OC Tweaker Settings
Overclock Mode
BCLK Frequency (MHz)
Boot Failure Guard
Boot Failure Guard Count
Spread Spectrum
CPU Ratio Setting
QPI Frequency
DRAM Frequency
DRAM Timing Control
VCCM(DRAM) Voltage
Would you like to save current setting as
user defaults ?
Save 1st User Defaults
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Overclock Mode
Use this to select Overclock Mode. Configuration options: [Auto], [Manual]
and [Optimized]. The default value is [Auto].
BCLK Frequency (MHz)
Use this option to adjust BCLK (Internal Base Clock) frequency.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Boot Failure Guard Count
Enable or disable the feature of Boot Failure Guard Count.
Spread Spectrum
This item should always be [Auto] for better system stability.
CPU Ratio Setting
If the ratio status is unlocked, you will find this item appear to allow you
changing the ratio value of this motherboard.
QPI Frequency
Use this option to adjust QPI (QuickPath Interconnect) frequency. Configu-
ration options: [Auto], [3.200GT], [3.733GT], [4.266GT] and [4.800GT]. The
default value is [Auto].
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically. You may select
[Auto], [400MHz DDR3_800)] or [533MHz DDR3_1066)].
3 8 3 8 3 8
3 8 3 8
BIOS SETUP UTILITY
Advanced H/W Monitor Boot
Overclocking may cause
damage to your CPU and
[Auto]
motherboard.
[133]
It should be done at
[Enabled]
your own risk and
[3]
expense.
[Auto]
[Auto]
[Auto]
4.800GT
[Auto]
DDR3_1066
[Auto]
Enter Go to Sub Screen
F1
F9
F10
ESC
[User Default 1]
Security Exit
Select Screen
Select Item
General Help
Load Defaults
Save and Exit
Exit