Ide Configuration - ASROCK CONROE1333-D667 - V1.1 User Manual

3.3.4 3.3.4

IDE Configuration

IDE Configuration
3.3.4 IDE Configuration 3.3.4 3.3.4 IDE Configuration IDE Configuration
BIOS SETUP UTILITY
Advanced
IDE Configuration
[Enhanced]
ATA/IDE Configuration
SATAII 1
[Hard Disk]
SATAII 2
[Not Detected]
SATAII 3
[Not Detected]
SATAII 4
[Not Detected]
IDE1 Master [ATAPI CDROM]
IDE1 Slave
[Not Detected]
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
ATA/IDE Configuration
Please select [Compatible] when you install legacy OS (Windows NT). If
native OS (Windows 2000 / XP) is installed, please select [Enhanced].
When [Compatible] is selected
Combined Option
It allows you to select between [SATA 1, SATA 2, SATA 3, SATA 4], [SATA
1, SATA 3, IDE 1], and [IDE 1, SATA 2, SATA 4]. If it is set to [SATA 1, SATA
3, IDE 1], then SATAII_2, SATAII_4 will not work. Likewise, if it is set to [IDE
1, SATA 2, SATA 4], then SATAII_1, SATAII_3 will not work.
Because Intel
under legacy OS (Windows NT), you have to choose [SATA 1, SATA 2,
SATA 3, SATA 4], [SATA 1, SATA 3, IDE 1], or [IDE 1, SATA 2, SATA 4]
when the installed device is used with legacy OS.
[SATA 1, SATA 2,
SATA 3, SATA 4]
Master SATAII 1, SATAII 2
Slave SATAII 3, SATAII 4
IDE Device Configuration
You may set the IDE configuration for the device that you specify. We will
use the "Primary IDE Master" as the example in the following instruction.
Set [Compatible]
when Legacy OS
(MS-DOS, Win NT)
device is used.
Set [Enhanced]
when Native OS
(Win2000 / XP)
is used.
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
®
ICH7 south bridge only supports four IDE devices
[SATA 1, SATA 3,
IDE 1]
SATAII 1
SATAII 3
[IDE 1, SATA 2,
SATA 4]
SATAII 2
SATAII 4
3 3 3 3 3 3
3 3 3 3