ASROCK CONROE1333-D667 - V1.1 User Manual page 8

Table of Contents

Advertisement

CAUTION!
1.
FSB1333-CPU will operate in overclocking mode. Under this situation,
PCIE frequency will also be overclocked to 115MHz.
2.
About the setting of "Hyper Threading Technology", please check page 28.
3.
This motherboard supports Untied Overclocking Technology. Please read
"Untied Overclocking Technology" on page 24 for details.
4.
This motherboard supports Dual Channel Memory Technology. Before you
implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 16 for proper installation.
5.
Please check the table below for the CPU FSB frequency and its corre-
sponding memory support frequency.
CPU FSB Frequency
1333
1066
800
533
* When you use a FSB1333-CPU on this motherboard, it will run at
DDRII500 if you adopt a DDRII533 memory module.
6.
Due to the chipset limitation, the actual memory size may be less than
4GB for the reservation for system usage under Windows
XP 64-bit, Windows
7.
Although this motherboard offers stepless control, it is not recommended
to perform over-clocking. Frequencies other than the recommended CPU
bus frequencies may cause the instability of the system or damage the
CPU.
8.
While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the
motherboard functions properly and unplug the power cord, then plug it
back again. To improve heat dissipation, remember to spray thermal
grease between the CPU and the heatsink when you install the PC system.
9.
The maximum shared memory size is defined by the chipset vendor and
is subject to change. Please check Intel
10. For microphone input, this motherboard supports both stereo and mono
modes. For audio output, this motherboard supports 2-channel, 4-channel,
6-channel, and 8-channel modes. Please check the table on page 11 for
proper connection.
11. Before installing SATAII hard disk to SATAII connector, please read the "SATAII
Hard Disk Setup Guide" on page 23 to adjust your SATAII hard disk drive to
SATAII mode. You can also connect SATA hard disk to SATAII connector
directly.
12. Power Management for USB 2.0 works fine under Microsoft
TM
Vista
64-bit / Vista
®
13. Microsoft
long as we have the latest driver, we will update it to our website in the future.
Please visit our website for Microsoft
and related information.
ASRock website
8 8 8 8 8
Memory Support Frequency
DDRII533*, DDRII667
DDRII533, DDRII667
DDRII400, DDRII533, DDRII667
DDRII400, DDRII533
®
TM
Vista
and Windows
®
website for the latest information.
TM
/ XP 64-bit / XP SP1 or SP2 / 2000 SP4.
®
TM
TM
Windows
Vista
/ Vista
64-bit driver keeps on updating now. As
®
Windows
http://www.asrock.com
®
XP, Windows
®
®
TM
Vista
64-bit.
®
®
Windows
®
TM
TM
Vista
/ Vista
64-bit driver

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents