Bios Setup Utility Bios Setup Utility; Etup Utility; Introduction; Bios Menu Bar - ASROCK ALIVENF6P-VSTA User Manual

Hide thumbs Also See for ALIVENF6P-VSTA:
Table of Contents

Advertisement

3. 3. 3. 3. 3. BIOS SETUP UTILITY
BIOS SETUP UTILITY
BIOS SETUP UTILITY
BIOS SETUP UTILITY
BIOS SETUP UTILITY

3.1 Introduction

3.1 Introduction
3.1 Introduction
3.1 Introduction
3.1 Introduction
This section explains how to use the BIOS SETUP UTILITY to configure your system.
The Flash Memory on the motherboard stores the BIOS SETUP UTILITY. You may run
the BIOS SETUP UTILITY when you start up the computer. Please press <F2> during
the Power-On-Self-Test (POST) to enter the BIOS SETUP UTILITY, otherwise, POST
will continue with its test routines.
If you wish to enter the BIOS SETUP UTILITY after POST, restart the system by
pressing <Ctl> + <Alt> + <Delete>, or by pressing the reset button on the system
chassis. You may also restart by turning the system off and then back on.
Because the BIOS software is constantly being updated, the following
BIOS setup screens and descriptions are for reference purpose only,
and they may not exactly match what you see on your screen.
3.1.1
3.1.1
3.1.1

3.1.1 BIOS Menu Bar

3.1.1
BIOS Menu Bar
BIOS Menu Bar
BIOS Menu Bar
BIOS Menu Bar
The top of the screen has a menu bar with the following selections:
To set up the system time/date information
Main
To set up the advanced BIOS features
Advanced
H/W Monitor To display current hardware status
To set up the default system device to locate and load the
Boot
Operating System
To set up the security features
Security
To exit the current screen or the BIOS SETUP UTILITY
Exit
Use <
> key or <
> key to choose among the selections on the menu bar,
and then press <Enter> to get into the sub screen.
3 0
3 0
3 0
3 0
3 0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents