ASROCK A770DE User Manual page 41

Overclock Mode
Use this to select Overclock Mode. The default value is [Auto]. Configura-
tion options: [Auto], [CPU, PCIE, Sync.], [CPU, PCIE, Async.] and [Optimized].
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency.
Spread Spectrum
This item should always be [Auto] for better system stability.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Cool 'n' Quiet
Use this item to enable or disable AMD's Cool 'n' Quiet
default value is [Auto]. Configuration options: [Auto], [Enabled] and
[Disabled]. If you install Windows
please set this item to [Enabled]. Please note that enabling this function may
reduce CPU voltage and memory frequency, and lead to system stability or
compatibility issue with some memory modules or power supplies. Please
set this item to [Disable] if above issue occurs.
Secure Virtual Machine
When this option is set to [Enabled], a VMM (Virtual Machine Architecture)
can utilize the additional hardware capabilities provided by AMD-V. The
default value is [Enabled]. Configuration options: [Enabled] and [Disabled].
Enhance Halt State
This option appears only when you adopt Phenom CPU. All processors
support the Halt State (C1). The C1 state is supported through the native
processor instructions HLT and MWAIT and requires no hardware support
from the chipset. In the C1 power state, the processor maintains the con-
text of the system caches.
L3 Cache Allocation
This option appears only when you adopt Phenom CPU. The default value
is [Auto]. Configuration options: [Auto], [BSP Only] and [All Cores].
Advanced Clock Calibration
This allows you to adjust Advanced Clock Calibration feature. The default
value is [Disabled]. Configuration options: [Disabled], [Auto], [All Cores] and
[Per Core]. If you select [All Cores], you will see the option "Value (All
Cores)". Configuration options: [+12%] to [-12%]. If you select [Per Core],
you will see the options "Value (Core 0)", "Value (Core 1)", "Value (Core 2)
" and "Value (Core 3)". Configuration options: [+12%] to [-12%].
Processor Maximum Frequency
It will display Processor Maximum Frequency for reference.
technology. The
TM
Vista and want to enable this function,
® TM
4 1 4 1 4 1 4 1 4 1